Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

well ive been busy at work and havnt had a chance to update for a while but good and bad news.... good news turbos back on with dumps and front pipes all good to go... bad news is that the ARC Airbox didn't fit with my Greddy intake kit :(

post-94184-0-41974100-1384071686_thumb.jpg

  • 1 month later...

well the surprise was a T51R!
it was almost ready to tune but decided to buy the HKS T51R KAI BB as ive always liked the sound and thought its time to put a single and start having some fun!

So tuner had to take off turbos again and put T51R on, its almost done, taking a little bit longer than I expected but needed to fabricate dump pipe, plumb the screamer into the dump pipe, once finished should be wiring in haltech and ready for a tune.

expecting it be finished real soon.

in other news I have a 4000km old twin turbo setup and some parts as you can see that only ever got bolted on and never used all up for sale :D

more to follow in the next few days

post-94184-0-55383000-1389053985_thumb.jpg

post-94184-0-83254800-1389053987_thumb.jpg

post-94184-0-58410700-1389053989_thumb.jpg

  • 2 weeks later...

The Car then made its way onto the DYNO where a leak in the inlet manifold gasket was found, so it got replaced with a NITTO Gasket and back on it went.
first was a tune on 98 @ 16psi and made 317kw we left that as the 98 tune as the car was going to be set up with FLEX TUNE and mostly run on E85.
the car then pushed 380kw @ 21.5psi on E85.

post-94184-0-00651800-1390985214_thumb.jpg

post-94184-0-88117200-1390985214_thumb.jpg

It's a little bit laggy compared to the -5s but you can feel the car build the power and the power delivery is amazing! Compared the 2 the t51 comes on boost later but it still has a feelin of torque in the midrange but it's a lot more dinner to drive and it feels a lot better to drive aswell the power delivery between gears are faster than the -5's overall happy with the decision to change. The twin turbo setup felt lazy and sluggish where the big single feels free and open if that makes sense

Cool. always interesting to hear how the car feels vs the dyno considering power and tourque are lower down low...good feedback! Must come on pretty strong!

Good point about performence between gears. I guess the power/torque differential down low isn't an issue between gears because you're in the higher range on shifts so you're net/net higher on both power and torque while you're hammering vs -5s.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...