Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Sup Y'all?

I've been hiding... Busy working too much, getting a house built, planning weddings... The usual time consuming stuff...

Damn work made me miss pork knuckle :( It's been a whole 4 days since my last pork knuckle :( But that one was at Barvarian Bier Cafe not Z german club...

No more like.... *Marp marp marp marp marp crush grind ping knock knock knock knock*

This was more along the lines of it.. it was telling a lot of poor knock knock jokes till it was no more. Driving it home in 5 cylinders didn't help either

u need to get it checked out man. I think it's internal sadly :(

sigh... ill keep looking for something. might try and do a comp test and check for leaks this weekend.

would a small leak cause it to hunt like that? or a possible dead coil pack?

i unplugged the AFM and still ran shit dont think its a air leak...

sigh... ill keep looking for something. might try and do a comp test and check for leaks this weekend.

would a small leak cause it to hunt like that? or a possible dead coil pack?

i unplugged the AFM and still ran shit dont think its a air leak...

facts are as follows Ed:

1. Something went bang whilst driving / been driven

2. Big puffs of smoke coming out the exhaust (what color is it BTW?)

3. Engine runs like a donkey ever since noise occurred

4. New set of plugs did not fix the problem

5. Take the guidance of Ants and see a Mech for diagnosis of engine

Yes, leak test and comp test are on the cards Ed.

Im guna say it.

I call bs it went bang at idle. You were boosting and split a hose. Do a boost leak test, check all hose clamps, ic piping etc.

seriously it was sitting at lights when it happen didn't even boost it cause car was still cold.... so from that video you would look for a split ic piping ect?

seriously it was sitting at lights when it happen didn't even boost it cause car was still cold.... so from that video you would look for a split ic piping ect?

just watched the vid. Sounds terrible but could be the location. Let idle and pull coil pack connectors 1 at a time and see if rpms change. If the rpms drop on a particular cyl report back. Edited by MagicMikeZ32

just watched the vid. Sounds terrible but could be the location. Let idle and pull coil pack connectors 1 at a time and see if rpms change. If the rpms drop on a particular cyl report back.

ok will try this in the morning pending time.

G nite all

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
    • Hey mate, really appreciate the help. Have been looking pretty extensively myself and was certain they were retro fitted, but then ended up finding a 4 door with what looks like the same side skirts or at least the closest I’ve seen. The photos from the Offset Kings event at Sunrise 2016. https://fatlace.com/offset-kings-okayama-at-sunrise/
    • Isn't there a PAR engineering gearset that has closer to stock ratios? And they claim they'll do whatever ratios you want.
×
×
  • Create New...