Jump to content
SAU Community

Plumbing Back Atmo Bov's

ZRBE

By ZRBE,
in Engines & Forced Induction

 Share

Recommended Posts

ZRBE Experienced

ZRBE

Posted
  • Author
Posted

So when the car makes boost it gets faster? That sounds pretty normal dude lol

Or do you mean when its already on boost it feels like the torque drops off at redline? if so that is normal, you get a big whack of midrange torque with the stock turbo around 4-6k then the torque drops off by redline as the tiny turbo can't provide any extra air. If you want that feeling to redline you need a bigger turbo.

Lol, trying to think how I can explain this to the best of my knowledge..

Say I take off from the lights in 1st gear, change to 2nd normally, then put the foot down.. It very slowly makes boost because of the t04e and does get faster as it should.. But then when I hit about 10-12 psi, maybe around 5500RPM (still in 2nd) it feels like the turbo is choking and you feel the car die off a little and splutter like it isn't sucking any air at all? (foot still down)

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

SargeRX8
SargeRX8

You dont need to bash it. When on boost theres 12 or what ever boodt you're running coming through the silicone hose on your bov pushing down on it to help keep it shut. So as long you've got some spr

GTSBoy
GTSBoy

Yes it is that easy.....except that you have to be able to bolt it all together once it is welded up. So a little thought during the "design" phase can save you a lot of swearing later. Main point o

shaunus
shaunus

Just take the plastic piece out from the vent on the SSQV. Will be much quieter and not make that high pitched whistle. I also couldn't stand the SSQV sound. This worked. Try it.

Rolls Grand Master

Rolls

Posted
Posted (edited)

Sounds like the typical rich/bad spark misfire that so many people get. Go read up on the previous threads eg the 5500rpm misfire thread, it is usually a combination of too rich/bad coils/bad plugs causing a misfire.

It is extremely common and almost certainly your problem.

Edited by Rolls
Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

Yes was tuned at chiptorque... Lol

18psi - 171kws

(I was more of a noob back then :D)

WUT? you can make that kind of power on a RB25 S1 turbo bolted to a RB20DET @ 1bar (tuned of course)

ZRBE Experienced

ZRBE

Posted
  • Author
Posted

WUT? you can make that kind of power on a RB25 S1 turbo bolted to a RB20DET @ 1bar (tuned of course)

Don't want to get off topic, but, long story short..

Bought car, booked it in for tune straight away lol.. And just went to some

Random tuning place that don't do skylines or anything..

Don't think it was a very good/safe tune.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      Why are people so insistent on making dirty water?!
    • Dose Pipe Sutututu
      Duncan's V37.......race car?

      By Dose Pipe Sutututu · Posted

      Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...