Jump to content
SAU Community

Recommended Posts

havnt cleaned the airflow meter.

when i did the spark plugs all the electrical plugs seemed fine, what exactly should i be looking for tho? and what is AFM?

Changed the fuel filter, and cleaned my air filter but ill buy a new one 2moz.

I didnt reset the ecu after doing the new spark plugs, but did it before hand to hope it fixed it before doing the spark plugs and also took it for a spirited drive.

Just to make sure, to reset the ecu, you unplug the - terminal off the battery, press the brake a few times and turn lights on for a few minutes, then wait 30mins and reconnect. correct?

hmmm...

AFM is Airflow meter. CAS is Crank angle sensor.

Reseting the ECU should only need, disconnect, pump the brake for 30secs, reconnect but you can leave for longer or overnite etc if you wish.

Just check for dirty or bent contacts etc...

even try jiggling wiring while it's running too.

Try diconnecting each coil 1 by 1 and see if it stops it. It will only be running on 5 cylinders at a time but if one of your coils is goosed the chugging shouldn't happen when disconnected.

haha i feel so dumb bout asking the AFM now, i should have put 2 together LOL!

ok well ill look on the forum on how to find and clean the AFM and CAS, and tomorrow ill reset the ecu and put in a new air filter, ill make sure the tyre's are straight because i've been warned about the HICAS.

Just curious to why resetting the ECU would fix this, and should i do that everytime i fit parts?

Im quite new to most this mechanical work, ive only done a few things before, so i apologise for my lack of knowledge, but im learning :D i love SAU!!!

It's all good mate. SAU is a bottomless pit of Knowledge. :thumbsup:

I am an Eternal n00b myself but always learning. :D

ECU reset can be a good thing with new mods but isn't really necessary and can fix things (sometimes).

Example... In my 94 Bluebird, it had a weird thing going on which I was told by a mechanic was my injectors packing in.

I had it to a different mechanic who diagnosed and fixed a leaking intake gasket but the weird lumpiness was still there.

I Reset the ECU and suddenly the weird lumpiness was gone.

CAS I would unplug and clean the contacts but don't unbolt or remove it unless you have a timing light and know how to use it. :P

no timing light so ill just clean the contacts, ive looked around this forum and google, but i dont know where the CAS :( im planning to go down and get some Contact cleaner tomoz and clean the AFM + New air filter so hope it helps cause im running low on $$$

to get to the coil packs in a rb25de, i have to remove the intake manifold as stated in the link below, unless your talking about a different way :S


http://www.skylinesaustralia.com/forums/topic/122284-r34-replacing-spark-plugs-on-neo6-rb20de-rb25de/

wasnt too bad, but if i was to do that, id have to unplug a coil, put it back together and do that for each coil, its alot of work, but as we speak, im cleaning the AFM as it was filthy! really filthy! and changing oil, plus ill add more fuel and octane booster and injector cleaner through

Hell yeah, sounding so much better now :D so far on the car i have changed the oil, cleaned inside the filter box (fair few leaves and foam from off the air intake, was so surprised), new air filter, cleaned the AFM which was bloody filthy, added extra fuel with octane booster and injector cleaner, new fuel filter, new spark plugs, new battery.

So tomorrow ill be taking it to the servo and full tanking it. its currently on 3 quarters and a half. but hoping that little bit more fuel, makes the chugging disappear completely,

If it all works well and the car is fixed, ill be making a donation to SAU, as every detail that came from this site was so helpful! i applaud you all!! :cheers::thanks::thumbsup:

  • 1 month later...

Good to hear the AFM clean helped!

Should also point out - 34 GT's ad GT-T's DO NOT like any form of modifications on factory ECU's - they'll retard the timing and run fat as soon as they detect any increase in airflow.

Other than this, splitfire are a damn good way to go regarding coils - spend the money and get the good stuff, you won't be sorry.

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...