Jump to content
SAU Community

Recommended Posts

Hi guys my 32 Gtr has a excedy twin plate carbon clutch that is showing signs of slipping above 350 kw after 3 months if other issues being tuned. I spoke to jb as I need a clutch to hold 450 kw and 1000 nm of torque, jb is $1295 then I read about npc clutches but havnt spoken to them yet, is jb worth the apparent extra coin?

Scott

Link to comment
https://www.sau.com.au/forums/topic/432850-jb-or-npc-clutch-for-32-gtr/
Share on other sites

I think the biggest NPC single is rated at around 400kws...after that you would need their twin plate that is about 1400$ iirc...there is a lot of debate over which is better single or twin...personally I would go for a twin or even hunt around for a triple for that sort of power as it supplies a better/softer transition...The brute force of a single while effective at getting power down, that load can be tough on your driveline and your crank bearings...Thats my theory anyway I'm sure many will disagree...

That kinda why I went the twin but probably should have gone triple in the first place, oh well ... Live and learn but I don't want to take this thing apart again after this so a few hundred wont kill me it's better than 3k for a jap unit I guess

Nismo copper mix twin plate all the way, drives like a factory clutch and know of one holding 475 at the wheels, including massive launches and been in the car for 8 years

Also have the added bonus of not exploding

  • Like 1

Decided to go Jim berry solid centre single plate, I rang npc and wasn't really impressed with their knowledge. Jim explained all the different clutches and that single twin or triple plate the only thing that stops stuff breaking is mechanical sympathy. As you strengthen one link something else becomes weaker in the chain. Also he uses new components unless you send him your clutch that is . Price wise it's $1400 delivered whereas npc twin plate is $2500 same as nismo. Interestingly jim says nismo is the same clutch as excedy twin plate and has good clutch plates but the pressure plate is rubbish in his opinion . He also says its impossible to rate a clutch for horsepower or torque as he explained how do they do it? Rate it at 400kw what does that mean 402 it fails ? AnywAy just thought is share part of my long convo lol

He can talk the leg of a chair that's for sure...NPC you probably just got a salesman, where as Jim always answers the phone personally it seems...Ask to speak to the owner at NPC im sure you will get a wealth of knowledge as I believe he did his apprenticeship at exedy.. ;)

As for rating a clutch I think it is fair to give a basic guideline if how much it can handle..So no it doesn't mean it will fail at 402kws..and saying such a thing is a little ridiculous on Jims behalf...It is merely an estimate or a guideline as to how much it can reasonably handle....NPCs 300kw clutches have been known to hold 350kw...but they give 300kws as a reasonable estimate of what it can handle and build a clutch that exceeds its own specifications..I think thats fair..

Didn't know the twin plate was 2500$ though..So JB is probably your best bet on that budget anyway..hope it works well for you ...

Yes possibly got a sales man but he was very disinterested and only wanted to sell me a single plate anyway had to push for twin price and yeah it suprised me a bit too as its same price as jap units! I know what your saying about a guide but the way he explained it in much much much more depth kinda made sense. He said maybe the japs and other countries could have a way of testing it but in oz there was only one machine who I can't remember and they don't let anyone else have access to it. Also he said the two best manufactures Sachs and ap have exactly the same clutch but the ap is rated at 40 percent more than Sachs and Germans are generally conservative but that does seen like a huge difference so should only be thought of as a rough guide. He said he has had his full Monty on 1000hp rb and 2j but he won't rate it at that as it depends on many other factors such as use, driver car weight but mainly the nut behind the wheel , however I see what ur saying and I also hope it works in my application

In fairness I agree with Jim if you side step a Gtr say with semi slicks that don't break traction something has to give and if the clutch is upgraded then its further Down the driveline, seems logical. I do my starts as he suggested anyhow ride it a bit in first , short shift then get into it, possibly could be faster but at least I can drive home

Oh for sure.... and if you have 4200lb of pressure plate whats gunna give first ?

At the end of the day its cheaper and easier to replace a clutch than rebuild an engine with shot bearings ;)

but yes, driving style is the ultimate decider no matter what clutch you have....

But once it's clamped or engaged does it really matter if its 3000 or 4000 lb? Surely it's only relevant if clutch is dumped ? Please explain your thoughts / experience before I make another mistake

Ta

nah you're not making a mistake mate....good clutches...:thumbsup:

I was going to get a JB but scored an NPC for half price and its an great clutch...and I know there is more than a few racers here using them ...I don't know why SIR_RB is knocking them, unless he was knocking the sales service and not the clutch themselves......

There are going to be lots of different experiences. Here is mine..

Got JB 4200lb clamp single, lasted 500km, exploded and took out gearbox.. He sent me another and ever time I'd try and launch (slip clutch a bit ) it would weld itself together, took it out after only 5000km and it was shagged, both of them engaged like a sledgehammer.

My next clutch will be a nismo copper mix, everyone with one loves them..

Anyway good luck with what ever you choose

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...