Jump to content
SAU Community

Moving To Vic Next Year, Have A Few Questions


Recommended Posts

Hey folks, I am moving from the ACT to Melbourne next year and had a few questions that some of you can hopefully help out with.

Registration wise, if I am bringing a car from interstate to Vic do I have to go to an rta inspectation station or do I just go to the same place locals get theirs done at? Also related, do you guys have to get yearly inspections like NSW or do you have a similar system to the act where you get inspected when you first get the car then don't need an inspection any more unless you get defected or rego lapses?

Police wise, what are the police like with imports? In the act unless you a driving like a tool or your car clearly looks like its in breach of the law they will normally leave you alone. Is Melbourne similar or are the police quite strict?

Sau wise do you folk have weekly meets somewhere?

Also any other information you think might be useful would be awesome.

Thanks in advance for any answers regardless of them being helpful or not.

Edited by azathoth

In Victoria, we have VicRoads, which is our equivalent of your RTA. You only need an inspection (and therefore RWC) during first registration in our state, transfer of ownership, or to clear a major defect / notice of unroadworthy.

SAU Vic hold monthly meets open to members and non-members. We have member only events too. People on the forums do organise their own events too, though not so much during the colder months.

Police attention is random and depends largely upon where you live or travel through. Don't let someone tell you that if you drive sensibly, in a car that doesn't draw attention, then you will be cop free...because they are likely inexperienced and/or lucky. It is true that doing these two things will improve your chances of being left alone, but we are the defect state for a reason. People do get hassled in standard imports and defected/fined for something arbitrary; people also get ignored in loud shitboxes with chrome bits hanging off. It's luck of the draw sometimes, and the area / the kind of cop you come across both have a lot to do with it. If you're driving an import here, do so with the expectancy to have a run in at some point and you will have no nasty surprises :)

Thanks for the help folks.

I would bring fireworks if I could, the fun police took them away from us years ago. It made peoples dogs bark or something.

Decat + Ignition Cut Rev Limiter + Flame Show...

We do what we can to bring the fun back into this crazy world...

You don't need a RWC certificate unless you are transferring the car to someone else's name. You'll just need to make an appointment with Vicroads to get the car registered as per:

http://www.vicroads.vic.gov.au/Home/Registration/NewToVictoria/InterstateVehicleRegistration.htm

Thanks for that link. Does the appointment include an inspection or is it just sitting down at a desk and filling out forms and handing old plates in and getting new ones?

Sorry about the ignorance :3

ACT laws are the only ones I have ever known haha

if you can keep ACT rego, i'd suggest keeping ACT rego.

You can only keep rego for like 3 months though man, after that the police can fine you for not transferring the rego over if you live in Vic permanently

You can only keep rego for like 3 months though man, after that the police can fine you for not transferring the rego over if you live in Vic permanently

"i'm here for work, i transit between ACT and melbourne about fortnightly"

what? they going to send someone to follow you around? not worth that 700$ mang.

happened to a mate and he got fined, car was still regoed in QLD and he got fined and told to transfer rego over :S

=(

seems like he met a dick of a cop.

drove the snorer on nsw rego till it ran out, no issues, mate from shitney is still driving his civic on nsw rego, no issues.

In terms of the rego - Im not sure if ACT is same as NSW but VIC rego is much cheaper and less of a hassle. No annual RWC required and cost is just over $700. If ACT is anything like NSW, then it maybe worth transferring. The only thing is the VIC laws (and enforcement) in regards to defects/mods/EPA's and the like are much stricter, so its abit of a risk.

Vic police cant fine you or driving an ACT regoed car if you have a ACT licence and the address is valid. The line as mentioned above is that you've got 3 months, but in reality as long as you are able to receive mail to the address on the licence and rego they cannot fine you for not transferring (well they can fine you - and probably will, but you would be able to quite appeal the penalty in court on the grounds that you legally still live at ur ACT address if you are receiving mail)

Hope this helps

Thanks for that, to be honest it will be a hassle to keep it for longer than three months. We are renting at the moment and i don't really want my mail to still come here.
I think it is about 800-900 for a full year here and that included the CTPI. In vic do you pay rego yearly or can you do like here with 3/6/12 month increments? No yearly inspection is good, that is like here.

I am not too worried about the police, i am not the sort that does things to attract attention but just in case, i am already changing things to make it look more sedate, changing my BOV to a plum back, getting a return flow IC and going to paint it black so it's harder to notice and getting a box for my pod. My exhaust is actually a few DB quieter than legal here so i should be fine with that.

Are coilovers legal in vic as long as they are at or above legal height like here in the ACT?

Thanks for all the help again folks.

I'm looking forward to joining up with SAU Vic once i'm down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • This is for an RB20DET. Sorry for not including that. 
    • Welp, this is where my compression lands after my rebuild. Thoughts? I have ~6 hours on the motor. 
    • Well, after the full circus this week (new gearbag, 14 psi actuator on, injectors and AFM upgraded, and.....turbo repair) the diagnosis on the wastegate is in. It was broken. It was broken in a really strange way. The weld that holds the lever arm onto the wastegate flapper shaft broke. Broke completely, but broke in such a way that it could go back together in the "correct" position, or it could rearrange itself somewhere else along the fracture plane and sit with the flapper not parallel to the lever. So, who knows how and when exactly what happened? No-one will ever know. Was it broken like this the first time it spat the circlip and wedged itself deep into the dump? Or was it only broken when I tried to pry it back into place? (I didn't try that hard, but who knows?). Or did it break first? Or did it break between the first and second event of wierdness? Meh. It doesn't matter now. It is welded back together. And it is now held closed by a 14 psi actuator, so...the car has been tuned with the supporting mods (and the order of operations there is that the supporting mods and dyno needed to be able to be done first before adding boost, because it was pinging on <<14 psi with the new turbo with only a 6 psi actuator). And then tuned up a bit, and with the boost controller turned off throughout that process. So it was only running WG pressure and so only hit about 15-16 psi. The turbo is still ever so slightly lazier than might be preferred - like it is still a bit on the big side for the engine. I haven't tested it on the road properly in any way - just driven it around in traffic for a half hour or so. But it is like chalk and cheese compared to what it was. Between dyno numbers and driving feedback: It makes 100 kW at 3k rpm, which is OK, could be better. That's stock 2JZ territory, or RB20 with G series 550. It actually starts building boost from 2k, which is certainly better than it did recently (with all the WG flapper bullshit). Although it's hard to remember what it was like prior to all that - it certainly seems much, much better. And that makes sense, given the WG was probably starting to blow open at anything above about 3 psi anyway (with the 6 psi actuator). It doesn't really get to "full boost" (say 16 psi) until >>4k rpm. I am hopeful that this is a feature of the lack of boost controller keeping boost pressure off the actuator, because it was turned off for the dyno and off for the drives afterward. There's more to be found here, I'm sure. It made 230 rwkW at not a lot more than 6k and held it to over 7k, so there seems to be plenty of potential to get it up to 250-260rwkW with 18 psi or so, which would be a decent effort, considering the stock sized turbo inlet pipework and AFM, and the return flow cooler. According to Tao, those things should definitely put a bit of a limit on it by that sort of number. I must stress that I have not opened the throttle 100% on the road yet - well, at least not 100% and allowed it to wind all the way up. It'll have to wait until some reasonable opportunity. I'm quite looking forward to that - it feels massively better than it has in a loooong time. It's back to its old self, plus about 20% extra powers over the best it ever did before. I'm going to get the boost controller set up to maximise spool and settle at no more than ~17 psi (for now) and then go back on the dyno to see what we can squeeze out of it. There is other interesting news too. I put together a replacement tube to fit the R35 AFM in the stock location. This is the first time the tuner has worked with one, because anyone else he has tuned for has gone from Z32 territory to aftermarket ECU. No-one has ever wanted to stay Nistuned and do what I've done. Anyway, his feedback is that the R35 AFM is super super super responsive. Tiny little changes in throttle position or load turn up immediately as a cell change on the maps. Way, way more responsive than any of the old skool AFMs. Makes it quite diffifult to tune as you have to stay right on top of that so you don't wander off the cell you wanted to tune. But it certainly seems to help with real world throttle response. That's hard to separate from all the other things that changed, but the "pedal feel" is certainly crisp.
    • I'm a bit confused by this post, so I'll address the bit I understand lol.  Use an air compressor and blow away the guide coat sanding residue. All the better if you have a moisture trap for your compressor. You'd want to do this a few times as you sand the area, you wouldn't for example sand the entire area till you think its perfect and then 'confirm' that is it by blowing away the guide coat residue.  Sand the area, blow away the guide coat residue, inspect the panel, back to sanding... rinse and repeat. 
×
×
  • Create New...