Jump to content
SAU Community

Recommended Posts

Hi guys,

I have searched and read a bit but the most relavent topic I found just had people listing which oil they use. There is no mention of which diff, internals etc.

I have an HR31 with a tired R200 Longose LSD, I have purchased a Nismo LSD rebuild kit which will be going in to tighten it up. It will most likely see more weekend driving than anything but I intend to do more drag nights at WSID and more track days in the coming year. Is there any specific type of oil I should use once the new LSD kit is in?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/433369-lsd-rebuild-kit-which-oil/
Share on other sites

I just got a Kaaz 2 way installed by Award diff and gearbox in sydney. Very happy with it by the way.

It came with oil..... BUT it doesnt last too long, it breaks down with the flogging it gets from the clutches. Especially on track day.

They advised me that there is basically 2 types of oil for lsd diffs:

1. the good stuff which has the friction modifiers bonded to the oil molecules - i cant remember which brands though >_<

2. the ones that basically have the friction modifier poured into the oil, wont last half as long before its stuffed and you need an oil change.

Any way the girl on the phone sure knows her stuff.

Its readily available in NZ from Nissan or from Motul dealers (its made by Motul). If your local Nissan dealer doesn't have it they should be able to order it for you as its specified for the latest GTR.

This is the Motul version:

http://www.motul.com/nz/en/products/108?f%5Bapplication%5D=141&f%5Brange%5D=25

and this is the Nismo (it is a slightly higher spec):

http://www.motul.com/nz/en/products/153?f%5Bapplication%5D=141&f%5Brange%5D=25

Quick look on Ebay reveals an Aussie supplier:

http://www.ebay.com.au/itm/Motul-Gear-Competition-75W140-1-0L-Diff-Transmission-Gear-Oil-/140797222944?pt=AU_Car_Parts_Accessories&hash=item20c82b2020

Thanks for the info. Been doing some research too. The nismo stuff is proving hard to find

http://www.penriteoil.com.au/products.php?id_categ=4&id_products=377

Penrite equivalent of the Motul 75/140.

May be easier for you to get. Alot of the newer cars with lsd's use this grade

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...