Jump to content
SAU Community

Recommended Posts

7:30am Sunday 15th August.

Mt Cotton Driver Training Centre, on Mt Cotton Rd, Mt Cotton.

$175 gets you 4 hours on the Skidpan, catered lunch (which is really nice) and 4 hours on the LVMA.

Lunch is available to spectators at $11 per head.

Skidpan = Miniature race track covered in water and diesel. Go totally sideways in a safe environment with very little wear on the car. Instructors go with you and will also drive your car if you want, they are there to teach you how to slide. You only need to have an instructor in for 1 run, then its a free for all. Result on the road - you'll be able to control/save your car in more 'situations' and be much more confident. Throttle control is a big winner. There is also a time trial on the skidpan.

LVMA = Big flat 150m x 150m bitumen area which is partly wet. Tracks are set out with cones. There is a slalom, motorkhana, and main time trial. Go ballistic against the clock and push the limits safely.

There will be trophies again for 1st 2nd and 3rd.

PM me for payment details.

Spots taken...

1. slip

2. Gary1

3 Kpyz

4. belgarion

5. Charly

6. Nexus

7. Johnny Cash

8. jlnewton

9. sxe32

10. Eug

11. jaqule

12. hilly

13. bob

14. bobs friend

15. some bird in a forester

16. schpanky

Watch out for the bats.

Link to comment
https://www.sau.com.au/forums/topic/43448-skidpan-day-sunday-15th-august/
Share on other sites

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Any news on the licence situation yet?

Tell them its Samantha, with the burgundy 33, went 2 nights in a row bout a month ago, the night that the Blue TX3 Laser got 1st in time trials, came off the track and got bogged and ripped my front bar off when we got it out. They loved me, hopefully they'll remember me :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...