Jump to content
SAU Community

Recommended Posts

hi all

i need to buy some new tires for the stag daily

most probably 245/40/18

where do you guys recomend as far as buying and fitting?

i would prefer to buy them and have them fitted at one place but if their is for instance an internet based cheap as hell place then i will do that

i have been looking at a few options/prices so far

Falken 453 $279 each

continental (forget which) $249 eash

Bridgestone RE002 $267 each

Khumo KU31 $160 ish each

im open to brands and opinions if one is available for great prices,

do we have an SAU tire guy?

also if someone is selling good tires in this size pm me

im no northern subburbs SA

Edited by GH05T
Link to comment
https://www.sau.com.au/forums/topic/434838-tires-fitted-where-to-buy/
Share on other sites

I just bought another set of KU31's for my 32R off ebay. SellerID: INT-TT

These were 235/45/17's at ~$100 per tire ~$10 each for delivery.

However 245/40/18 would probably be significantly more.

Mind you your also going to have to front a cost to have the tires fitted. This cost me around $40 from tyre power at parahills.

All up around ~$480 for the full set fitted and balanced, which isnt bad.

yeah not too bad,

my problem is im not sure what price increase is worth the dollars,

for instance im looking at things like achillies for cheap vs a bit more for khumo which i think is worth it, but should i spend even more and get the bridgestones?

am i getting a huge ammount more for my money or am i just getting the next tire in the line.

If you are only going to be driving on the street than I would highly recommend RE001's from Bridgestones. Slightly expensive but worth it in my opinion. I have KU 36's on the rear and RE001 on the front and that seems to be a pretty good combination. 36's give reasonable drive and the fronts grip like anything I have had so far.

Just get Achilles cost you about 450 for the set , correct weight and speed rating for stags , and to be honest there as good as my khumos that are twice the price , jet r31 runs them two

The questions you need to ask yourself are, what are your expectations? What do you want out of the tyre? Is it driven in the wet? How often do you want to be replacing them?

The thing to consider is that tyres are a consumable. So if all you're doing is driving around on the street and its daily driven. Do you really want to be slapping on tyres that are 2x the price when you wont even see the full potential of the tyre? Sure you want the added safety and the ability to pull up as soon as possible. I couldn't justify spending $1000 on a set of tyres that would only last me a year.

I dont think i'dd ever go back to KU36's on a daily. My GTR was abit of a handfull in the wet on KU36's. Of course if it wasn't daily driven they would have been ideal.

I cant comment on RE002's but it was a consideration at the time. In hindsight i regret the purchase of my KU31's as i no longer drive my GTR to work so it sits in the shed until it gets a hammering :)

Hey Zx,

that's basically what im trying to work out.

i do 600km a week, half highway driving, half city, sometimes spirited hills drives/ cruises, highspeed large roundabouts :P

i have bridgestone....somethings maby re001 or the 050 i dunno, on my current 17s, amazing tires, i have had khumo ku31 on my R32, not bad for the cost.

getting mixed feedback on Achilles but i know they are bang for buck the best for cheap.

im not interested in ku36 for 600km per week i dont want a semi slick, the bridgestones seem to have good life and well good all round.

Achilles will be damn cheap and for $1100 the bridgestone will be the best for that price (seeing as i cant seem to find any under $1500 fitted)

it seems i just need to decide to i cheap out and go Achilles or spend the extra and get the bridgestones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...