Jump to content
SAU Community

Recommended Posts

Hi guys,

I've got an R34 Tiptronic and Non Turbo.

I can only reach 3500 rpm before feeling the need to shift gear.

Any higher than that, it feels like it's struggling.

It's never reached up to 4000 even when the red line is 7000 or 6800.

Just want to confirm if that's normal for these cars? I've owned 2 R34's and both are the same.

Anyone know?

:thanks:

Link to comment
https://www.sau.com.au/forums/topic/434987-r34-na-tiptronic-revving-question/
Share on other sites

Feels like the engine wont be able to take it if I go any further.

Also, I have another revving problem..

2nd gear at 42km/h

3rd gear at 65km/h or sometimes 75km/h

watch the video.. what do you guys think? whats wrong with it?

Thanks

It does struggle above 4000 on neutral and also on any other gears.

The loss of power or hesitation only happens with 2nd gear(42kmh) and 3rd gear (65 or 75 kmh)

I haven't tested on auto yet.. Will see how it goes tomorrow

Oh yeah.. Another problem..

Sometimes it downshifts back to first gear after already getting to second gear(tiptronic)

I rev for a couple of secs in second gear and it downshifts and I'm back in first gear.

I'll be having everything checked together with my next minor service.

So I'm looking for anyone who has had these problems and any other ideas!

By the way, if you agree with someone, post a +1 for them and thanks for the above posts and ideas :thumbsup:

That sounds like transmission problems, friends skyline does the exact same thing, goes to 2nd, makes a revving noise as if its slipping, then wil either stay in 2nd or go back to first. Again this is not on tiptronic as hes tiptronic doesnt work.

It does struggle above 4000 on neutral and also on any other gears.

The loss of power or hesitation only happens with 2nd gear(42kmh) and 3rd gear (65 or 75 kmh)

I haven't tested on auto yet.. Will see how it goes tomorrow

Oh yeah.. Another problem..

Sometimes it downshifts back to first gear after already getting to second gear(tiptronic)

I rev for a couple of secs in second gear and it downshifts and I'm back in first gear.

I'll be having everything checked together with my next minor service.

So I'm looking for anyone who has had these problems and any other ideas!

By the way, if you agree with someone, post a +1 for them and thanks for the above posts and ideas :thumbsup:

Based on past experience with my brothers n/a r34 tip tronic, it ended up being somethign wrong with the fuel pressure/fuel lines. (either fuel pump, fuel filter, or blocked injectors). Basically the car wouldnt rev above 5000revs in tip tronic (and neutral), it would simply just struggle. I cant describe the sound in words, but ill give it a shot. Sounded like feathering the throttle in 2nd gear going 100ks per hour, even though the foot was to the floor. Anyways that being said, it was fixed by the mechanic, he did something fuel related, i have no clue what though. He also reset the ecu (unplug the battery).

Note: he also had tip tronic dash lights flashing etc....but it never ended up being his transmission. It could virtually be anything, so its hard to narrow down. R34s show weird lights for a reason which isnt even related to that particular component of the car.

Hopefully i helped ya man, sounds frustrating =(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...