Help With Wheel Fitment Before Swap

[mr turbo]

I just got a set of d1rs

18 8 +35

18 9 +15

Running 235/40r18

They didn't fit rear at all stuck way out and looked very dim

Now I and swapping for some

18 8.5 +30

18 9.5 +22

Will be still running my 235/40r18

Just wanna make sure new wheels I am swapping for will fit?

I have looked and looked. But nothing really

Have coilovers

And is a r32gtst

[GTSBoy]

Realistically they're still a bit wide at the rear.

[sweefu]

The rear fitment will be 1mm weaker.

Front will be 11mm more aggressive.

Use a rule or tape measure, and measure

[mr turbo]

Oh well have to find a new set to swap for or sell my d1rs

There brand new only test fitted and only 3 have had tyres fitted one still in box will be selling or swapping with tyres

[mii11x]

did the fronts fit ok, or did they hit the upper control arm and stick out past the stock guards??? on the d1r 18 8 +35 that is.

[colourclassic]

18x8 +35 will sit inside the guards, and won't hit the UCA.

[mii11x]

Hi mate,

Did the front 18x7.5 +35 fit at the front ok?? or did they hit the upper control arms and/or exceed the stock guards? Do you have any photo's??

I have 18x7.5 et45 on mine all round with 235/40/18 tyres

I have been wanting work xt7's for ages for ages but want a definite answer before I fork out $1800 for wheel that "should be" ok and that I cant trial fit with tyres.

18x7.5 +35 front

18x8.5 +38 rear

These should be "ok" from what jdm concept told me.

Keen to see photo's with the d1r's you have

Mick

[mii11x]

18x8 +35 will sit inside the guards, and won't hit the UCA.

Any photos mate??

[colourclassic]

No photo's mate; I don't have D1R's. 18x8 +35 will sit in by about 15mm from the edge of the front guard.

[PaulosECR33]

18 x 9 + 15 and 18 x 9.5 + 22 will poke pretty much the same the 9.5 + 22 will be 1mm in

[GotsWapan]

I run 19 x 9.5 on the back with no worries. But mines a high offset, something like +35 with 265/30/19 tyres.
But I suppose you're going for more dish?

[PaulosECR33]

18 x 9.5 + 30 or 35 would be perfect for the rears with no guard work. but guard work is good cos then you can fit 17 x 10 + 5 under there and thats better