Jump to content
SAU Community

Recommended Posts

Fair enough. But no one had done the R & D that hypergear has and he makes everything in house. Still supporting an Australian business. Just not Brisbane.

Edited by pipster11

Buying a used RB25 turbo for the 31. Who rebuilds these things locally. Want a steel wheel on it and a decent rebuild?

Chris the most important part is the balancing. GCG although not local (Sydney) have a Schenck balancing machine that is one of the best. They are very good and price competitive.

http://www.youtube.com/watch?v=_DtpNHkHYRQ

So there is no one local that does this?

Aware of the balancing of these things. Given the speeds they see if they were out a fraction all hell would break loose.

Trying to support local business for a change.as most of you are aware I spend a lot of money overseas on bits for these things

Thought I would give local business a chance at it.

The harmonics on the CHRA assembly of a turbocharger would be only out balanced at certain shaft speed and then balances it self out in neutral, just like as if your front wheel is out of balance and that vibration goes away before and after certain speed.

So regardless of whom ever has what ever balancing equipment, as long as its accurate you can only balance it to a certain point. That does not determine who's high flow job performs better, last longer or provides the best $=HP value.

Any way. Some information for the OP to compare with.

Our high flow out of 21U R33 turbocharger makes 320rwkws on E85 internally gated on a bolton setup with 22psi reached by 3500RPMs. and been in 5th in World Time Attack Sprint class 2013.

atr28ssRB25233kw.jpg

This service is for $850 including braided oil line.

Out of interest.. what machine do you use?

We use Hiens dynamic balancing systems. never had issues with any turbochargers that we've balanced.

Get the balancing right is only a small section of the map. There is shaft tolerances, clearances, machining tolerances of the housings, bearing housings, bearing housing bore, fluid dynamics in side the bearing housing, wheel materials, wheels sizes, blade profiles, waste gate assembly and more. Now high flowing factory turbocharger to suit a specific engine requires lots of knowledge and experiences working with that engine, to understand how the customized profile behaves in terms of generating power, boost and efficiency range with limitation of stock housings, in which we've spent lot of time on.

Having a reliable balancing machine can only result a well balanced shaft assembly. Once all criteria mentioned above meets, you have a good turbocharger. So the best way of making better choices is by comparing results.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...