Jump to content
SAU Community

Recommended Posts

they sound like cars from a lower category :/

That's what I was getting at, but we'll have to wait and see til they're at full noise I guess...

Eric Boullier appointed Racing Director. Read the official McLaren Mercedes press release here: http://tinyurl.com/nwwhfba

they're probably not going to ever hit the redline except in qualy. An article I read ages ago suggested that the fuel flow limit and power delivery characteristics of forced induction mean 12,000rpm is more likely to be the operational ceiling rather than the mandated 15,000rpm limit. They also have significantly less engines to use this year, so lower revs seems likely.

But having heard a few more videos, I'm starting to think they sound alright anyway. Sure, they're no V10, but those days are long gone...

I'm liking the looks of the cars too. Eg Force India looked crap in photos with that big black dong out the front, but it looks pretty good on the track. At least there's variety and innovation being shown which is interesting, and to me they all look better than the stepped noses from last year. Well, maybe not the Zoidberg Lotus...

It's very unlikely I know, but there's potential for a smaller budget team to have jagged a design edge thanks to these regs.

Also hoping the William livery isn't just for testing - it looks good in blue.

I'd wait till the next test or race day before writing the new engines off. I'm sure they are not going flat out yet. There must be plenty of engine and car tuning going on there. I know the engines have probably done thousands of hours on engine dynos, but thats different to taking it out on a track.

After all they went from 1:27's on the first day to 1:24's on the second day (unless my memory has failed me :) )

Just shows you how much they were holding back day 1

Last year they were sub 1:20's, with all the aero differences I dont expect them to get near last years times, but there is probably still a bit left in them

Or maybe I'm just saying this stuff so I will convince myself I like the new sound lol

If you can hear some turbo whistle maybe it will make up for it

To be honest, sounds like the honda nsx with an exhaust at high revs (obviously without the turbo :-) )

Whilst both sight and sound play a massive part in formula 1, for me its more the fact that this is the elite level of driving and pushing limitations on engineering and producing the quickest cars going around a circuit.

So just personally speaking, sound of the engines were nice but nothing worth getting too upset about as long as they still go fast. I am sure there is a WHOLE (yes i used caps!) lot of seconds to be stripped off these laptimes as we progress throughout the season. I think "Ve Tool" even said that in a recent press release.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...