Jump to content
SAU Community

Recommended Posts

So ive come up with the cash to put towards a set of coilovers and im now stuck on which of these to get, BC racing ER series or TEIN super street damper series.

The car in question is a 94 R32 GTR and my intention is mostly daily driven but im gonna get it on the track occasionally.

So if anyone with experience with either of these can throw in their opinion that would be great, Thanks.

Also is the TEIN EDFC worth setting up?

Link to comment
https://www.sau.com.au/forums/topic/435497-coilovers-tein-or-bc-racing/
Share on other sites

It depends exactly what you want your suspension to do.

TEIN Super Streets for a long lasting kit that is nice for street use, which will be very compliable over bumps and such things due to softer spring rates and less aggressively valved twin tube shocks.

BC ERs for a kit that is nicer on the track, more aggressive in spring rates and valving of the monotube shock absorbers. Also bump and rebound adjustability seperate rather than together with the TEINS.

I'm not sure where you live but TEIN Super Streets will be much easier to get over the pits/traffic here in WA than the BC's would be ;)

Okay well im still a bit struck between which one to get. Like I understand that the BC racing ER series is a bit more track orientated then the Teins but what I really want is just the better quality product. I just really dont want to skip quality on this car so if anyone can vouch for either brand to be of the better quality please let me know.

Yeh I am leaning more towards the Teins cause people keep saying they are a lot smoother on the street which to be honest is what the car is gonna be mainly doing is my daily drive. Just wanna get a few more opinions in before I decide.

Nizmo_man, ive actually wanted the bilstein/ohlins combo but I cant find the kit anywhere.

If you could point me in the right direction I will most likely get them

Edited by seventhirteen

I've got tein super streets. they are great for street driving. I love them.

fairly comfortable, (still firm, not soft squishy falcon comfortable). good for dealing with bumpy uneven roads.

combined with good swaybars, the car handles quite well.

for a track oriented car, i would probably say super streets are a little too soft.

My Ohlins are 3rd hand, so can't tell you where to buy new (if you can). But I'm sure someone will be able to whip up a Bilstein kit for you (e.g. this, then springs of your choice and get the dampers revalved to match the springs).

I also have old TEINs, which I used for a track day. Almost twice as stiff as the Ohlins/Eibach combo but a lot better for the track (I'm guessing they are early model HR). Bit too stiff for street driving in Sydney (depends on how much you can tolerate).

I know my experience is with old suspensions, but will give you an idea. At the end of the day, your budget is the limiting factor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...