Jump to content
SAU Community

Recommended Posts

Lol thanks mate! lots and lots. So no one knows any big power rb25s??

I have in my head these guys claimed something near 600rwkw for this - but can't find the reference. Can't specifically remember, but it'd have to be pretty up there... sticky tyres and an auto doesn't create the power needed to get a Skyline to over 150mph in 9s flat, that engine is making serious power.

Have you hit the dyno again?

Have you had new numbers

Lol yes that is mine. Hmm not too fussed on quarter figures coz with slicks and an auto you can do magical stuff lol I know dynos can vary but would like to know a figure.

mph v weight is a more accurate hp measure than a dyno. slicks and auto have no bearing on trap speed.

My car might be back on dyno this week

So you're saying a car doing a 1.5 60ft time will have the same mph as a car with a 2.2 60ft time?? I dont think so.

Awesome, good luck! Will you upgrade the turbo if it doesn't make much more? I'm still iffy about the compressor in that turbo being able to make a lot more power and interested to see what happens.

In regards to the trap speed.. depends on what the cause is of the slower 60ft time... I know people who have gone from 2.2 to ~1.6 and the trap speed hasn't really changed appreciably... I guess see it as being the difference between doing 0-200kph in under 11s, or over 12s :)

Thanks man. Well being a custom wheel it is unknown what it will do. It make 530rwkw very easy on only 24psi with huge intake temps. Now I have new plazmaman cooler we will see what it makes on 24 again and on 30 plus psi.

I was working on the theory that it's based off the 52trim 94mm compressor from the GT4094R (~80lb/min), and figured you might make 520-540rwkw before the first tune if it was that compressor. Soaring intake temps at 'only' 24psi isn't normally a good sign for compressor flow, but hopefully it does just turn out to be a really poor intercooler.

Yes alex and henry are great guys!

Its definitely the cooler, will have results with plazmaman soon. It made 485 on 21 then 515 on 24. Let it cool for 2min and it made 527 on 24 again. Id be very surprised if it is near maxed out

The highest out put RB25det motor I've seen is 900HP from Nisma performance center.

I'm currently doing 490rwkws I don't think the rest of the hardware can take it any further. A list of your mods would be helpful.

Its definitely the cooler, will have results with plazmaman soon. It made 485 on 21 then 515 on 24. Let it cool for 2min and it made 527 on 24 again. Id be very surprised if it is near maxed out

Very interested in seeing how the results go! What is your target?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...