Jump to content
SAU Community

Recommended Posts

Lol thanks mate! lots and lots. So no one knows any big power rb25s??

I have in my head these guys claimed something near 600rwkw for this - but can't find the reference. Can't specifically remember, but it'd have to be pretty up there... sticky tyres and an auto doesn't create the power needed to get a Skyline to over 150mph in 9s flat, that engine is making serious power.

Have you hit the dyno again?

Have you had new numbers

Lol yes that is mine. Hmm not too fussed on quarter figures coz with slicks and an auto you can do magical stuff lol I know dynos can vary but would like to know a figure.

mph v weight is a more accurate hp measure than a dyno. slicks and auto have no bearing on trap speed.

My car might be back on dyno this week

So you're saying a car doing a 1.5 60ft time will have the same mph as a car with a 2.2 60ft time?? I dont think so.

Awesome, good luck! Will you upgrade the turbo if it doesn't make much more? I'm still iffy about the compressor in that turbo being able to make a lot more power and interested to see what happens.

In regards to the trap speed.. depends on what the cause is of the slower 60ft time... I know people who have gone from 2.2 to ~1.6 and the trap speed hasn't really changed appreciably... I guess see it as being the difference between doing 0-200kph in under 11s, or over 12s :)

Thanks man. Well being a custom wheel it is unknown what it will do. It make 530rwkw very easy on only 24psi with huge intake temps. Now I have new plazmaman cooler we will see what it makes on 24 again and on 30 plus psi.

I was working on the theory that it's based off the 52trim 94mm compressor from the GT4094R (~80lb/min), and figured you might make 520-540rwkw before the first tune if it was that compressor. Soaring intake temps at 'only' 24psi isn't normally a good sign for compressor flow, but hopefully it does just turn out to be a really poor intercooler.

Yes alex and henry are great guys!

Its definitely the cooler, will have results with plazmaman soon. It made 485 on 21 then 515 on 24. Let it cool for 2min and it made 527 on 24 again. Id be very surprised if it is near maxed out

The highest out put RB25det motor I've seen is 900HP from Nisma performance center.

I'm currently doing 490rwkws I don't think the rest of the hardware can take it any further. A list of your mods would be helpful.

Its definitely the cooler, will have results with plazmaman soon. It made 485 on 21 then 515 on 24. Let it cool for 2min and it made 527 on 24 again. Id be very surprised if it is near maxed out

Very interested in seeing how the results go! What is your target?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
    • This thing did a 1:20.88 at Winton on the weekend which is f**king rapid.  Well done mate, your driving has really gone up a few notches not much left on the table now! Good luck at WTAC.   https://www.facebook.com/share/r/1MHyZQBqZ2/  
×
×
  • Create New...