Eugene Chan's Work

[PN-Mad]

No Terry, the stagea was actually quite thin, in the low 100s I think I remember. Eugene may have experience from his M35.

Look forward to seeing how he treats the 32.

[GTR-N1]

Eugene says that if it was resprayed, the whole car was done evenly Alex. Twas thick eh? Eugene can add his opinion too I think.

I was referring to the Bayside Blue V-Spec II that I previously had Alex.

[PN-Mad]

Ah, ok!

Didn't quite make sense to me.

[Daleo]

No Terry, the stagea was actually quite thin, in the low 100s I think I remember. Eugene may have experience from his M35.

Look forward to seeing how he treats the 32.

The middle of my roof came in at 64 microns.

​

Might be getting a roof wrap.

The rest was low 90's.

[PN-Mad]

Thin thin!!!

Shop could probably lay some new clear over the top to give you something to play with in the future.

[GTR-N1]

The roof is usually thinner than other parts. I don't know why that's policy since we cop eucalyptus leaves here; and even Hokkaido and northern Honshu will drop a surfeit of pine needles.

I opted for ceramic coat, since the paint is so thin. There's also an overlay hardening solution that is to be applied a month later.

After getting the car back to-day, I copped a thunderstorm on the M4 at St Marys > Eugene instructed me to wash the car with water only.

[Redline_GTR]

So shiny!

Haha looks great Terry

Will definitely be looking into this for my car in the future.

[MrFijiGold]

What a beaut!!

[suwidji]

amazing work!

Got a $ amount to put to the work?

[GTR-N1]

Sure, it's usually $400 - 500 depending on the car and work required. That includes sealant and then wax. If you subtract the sealant and wax in favour of ceramic coat, that's a different quote again. Hope this helps. Tez

[mxfly]

Once again, thank you Terry for giving me the opportunity to work on this incredible car.

Here's some before and after shots.

[PM-R33]

Very nice work mate

[Redline_GTR]

Wow can definitely see the contrast.

Fantastic job mate

[junkie]

Eugene, what do you use around the badges? Always difficult to get right...

[mxfly]

Hi there. I use a diluted all purpose cleaner like Optimum Power Clean and just some soft detailing brushes.

Spray it on. Let it dwell for a couple of mins and just agitate the area with a soft brush. Then rinse off.

[junkie]

Thanks mate. Time to revisit the Optimum products haven't used them since my bottle of spray wax ran out

[Aqua]

Love it!

[GTR-N1]

Stubborn ol' sticker removed > patch polish > replaced...

[Wongy]

Wow, very nice, will need to book my car in sometime

[GTR-N1]

You can meet Eugene on the 17th Nate.