Jump to content
SAU Community

Recommended Posts

Well it's been confirmed, Holden will be no more

http://www.theaustralian.com.au/national-affairs/holden-to-cease-operating-in-australia-from-2017/story-fn59niix-1226780453890

What sort of impact do you recon this will have on the country?

It's not a good thing. The amount of low skilled older age people who have to re-skill into a different industry is going to be a big problem, especially as most have families. The fallout from that is going to be the biggest issue.

Given Ford's previous announcement of pull out, I knew it was only going to be a matter of time.

I just hope the Federal Government gets smart & uses all the money it was going to give the manufacturers to re-skill the workers & create more jobs (we know that isn't going to happen though).

This country has been lucky through the years either side of the GFC, but the edge of the cliff is looming closer & I think the next year or two is going to be VERY telling.

  • 2 weeks later...

Hey wht510

If you checkout the post times of both OP's then you will see that this one was posted 5 minutes earlier than the other one.

Luck of the drawn

I knew about the other one straight after I posted above..........

Im mulling over whether its worth upgrading to a comfy HSV or maybe a G6E turbo....

Ive managed with an old car that was never even sold in this country, I dont suppose ford and holden ceasing production will make a huge amount of difference to spare parts, though it would be smart to double check how many new parts will be produced in years to come.

I believe they legally obligated to provide support for vehicles for something like 10 years after it's made. You can also guarantee that with so many Falcons and Commonwhores on the road, spares will be around for a very long time, either genuine or aftermarket.

That^

Just look at cars that aren't made anymore, like R33 Skylines or any older model of Commodore. Can still keep a VT on the road easily and it's more than 10 years old.

I've found genuine R32 body parts readily available whereas with trim and body parts for my Commo, it was always the same story, item no longer stocked, try the wreckers.

Car forums are still the best place to source reasonably priced parts for these old models.

Well it's been confirmed, Holden will be no more

this comment continues to annoy me.

"AUSTRALIAN COMMODORE" will be no more, thats it.

we may still have the commodore and we are likley to get the camaro and corvett soon enough, amongst other cars.

Holden employees loose there jobs, sa industry takes a big hit, thats whats happening, which sucks, but holden is not going away.

rant over.

The Ultimate Betrayer :-

"Come outside and look at what's just come into the country love: I've just bought a brand new 2017 Chevy!"

Wife:-

"You mean the car you bought in 2013 with the same badge was something else?"

...aaah, the amount of Aussie "enthusiasts" PROUD of their badge!!!!!!

LOL Terry, the Holden badge will be lost in a generation.

Badge swapping for something it's not is a BIG pet hate of mine. LIke a maroon Magna I spotted in traffic near my place with a GT-R badge on the boot, or the E39 BMW 5MPower (the 25 doesn't sound as fast) on Saturday!

There are others too, but a new thread is needed for that!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...