Jump to content
SAU Community

Recommended Posts

hey there,

my series 1 stagea is sitting at stock height and has 18inch wheels.... i noticed it has the floating feel when driving, the rear tends to float over bumps and gives the feeling that its following any grooves or bumps or ditches in the road... i had similar thing in the past with my commodore wagon and a hilux but am told its because they are light in the rear end...

is there anything i can do to try and sort the issue, i do not want to put coilovers in can't afford and i dont want to lower...

First thing to look at would be your rear dampers. If they're old/worn-out then they will definitely make the rear end feel floaty. If they check out to be good, then the next step would be to inspect the UCA and LCA bushes. After 15 years the stock items will be on their way out.

It is a wagon after all, and is built with a large empty box at the back. On my old worn set of tyres, getting down to a quarter tank of fuel was like an arcade drift game...

something other than worn tires is causing that.

thanks for the info, its had an alignment and is on brand new tyres...not sure of profile size, i will get the dampers and bushes checked out this week.......as for replacement ones if it is the scenario what kind of price range would i be looking at?

you dont need to lower your car, a stock high ride height is fine and shouldnt feel dangerous.

take it to pedders or somewhere that will do a full check testing shocks and componants.

theywill try and sell you everyting pedders under the sun but just get the check done and go from there.

Just my 2c, when I had a pedders 28 point inspection, they missed everything wrong with the suspension. When I paid $120 for a reputable workshop to do an inspection they came up with a very very thorough list (also more than the suspension). Most opinions on pedders are about as flattering.

*** However, I should add that I did not agree with everything on the comprehensive list. I also made more cost effective repairs eg, the workshop wanted to replace the entire strut and spring assembly just to replace the shock. I replaced the shocks myself.

I guess my experience was almost the opposite. I knew something (or several things) was wrong in the suspension and pedders didn't pick up on them. - as opposed to workshops usually racking up unnecessary repairs.

yeah get what your saying zoomzoom... i would go tomorrow and buy a set of coilovers if i could believe me and i think if our 2nd child wasn't so close to due date i would... but it sucks the floating when i am driving on my own in car but once there is a little weight from family being car its almost non existent.... and i can't really lower the car at the moment with my wife so close u know

Lowering the car isn't going to make any difference. Stock height is not causing the problem.

Yes it does , lowering the car puts constant pressure on the strut and pre- loads the suspension , its a short term cheap fix without replacing stock struts .

Like i said , this fixed my problem and very well .

Now i run Bilstiens with Tein lowering springs actually works better for street ride and will outlast any coilover .

Then again coilovers might be your best option to keep stock ride height ?

Bad advice going to pedders ……...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...