Jump to content
SAU Community

Recommended Posts

ooh yeah, just looked @ Elfin site. Cool stuff there! I know it's dear, but the MS8 looks wicked. Just imagine it with an RB26, 4WD, 6 speed Getrag, 6 Piston AP's...... there I go again, getting carried away! It's a disease!......... hey, jlnewton, can I buy your car once you finish it?

you can buy mine now if you want it.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896024
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Great thing about the 1600 is the low weight and a tin roof for daily driver. Technologically there is little difference to the clubby, and I would happily have both.

Don't get me wrong, there will be a lot of work to bring either up to speed, but I have found few cars more reliable and driveable than a well done 1600.

in the end i think a good clubby would destroy it though, and individuality is all important, hence my effort to make a quick GTS25t on track.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896055
Share on other sites

Clubman v GTR? the clubman will kill a GTR.....

eg Eastern Creek, a quick GTR will be around 1.45, clubmans about 1.41.....and EC is a high speed track, it gets even uglier on a tight track....eg a clubman has done 1.03 at Wakefield

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896151
Share on other sites

I have no idea what they're worth (though I'm guessing $$$$) but in a bike mag I read about a clubman-style thing, based on a Caterham Seven IIRC, that you could option all the way up to twin bike motors (choice of Hayabusa, Blackbird or ZX12R) and 4WD. 0-100kmh in 2.8 sec, and would no doubt lap any circuit on the planet faster than just about anything once setup right. If you're interested I can dig up the article and scan it, might take a while though, I have quite a few bike magazines :D Bolt a turbo to each of those motors, run low boost to keep it reliable(ish), and you'd have a 700hp, 500kg racer ;)

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896443
Share on other sites

Remember the Catheram took the lap record at Nurburgring from either Porsche Turbo or GTR and they were all excited. Good stuf but they are comparing a toy with a car with full comforts so I wasn't that impressed. Still a good drive though. Almost as good ast pete (fats) in the "little renault"

Yeah one of those would be wicked.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896901
Share on other sites

Pete's drive was good until he backed it into a wall at the ring! lol!

I was contemplating a clubman at one stage. The biggest worry was not parts which may need to be fabricated. The instructions given to you may not list the parts which need fabrication because there are a variety of engines which you could fit in there. But most common engine is the 4AGE 16V. I was talking to the guy who distrubutes Westfield kits for NSW and he said at the time the 4AGE 20V was not legal because of emissions testing not conducted on the engine.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896982
Share on other sites

Just got this from the PRB Site, been getting some good sydney stories from Roy now he is down here.

Mmmmm Focus engine, but the 20V is nice too. This has got my interest for a new buildup since I am selling a house in Melb soon and want to tinker in Bris when I get there. Would be a great project with the girly involved.

Now available with 79/00 emissions compliant Toyota 4AGE-20 valve or Ford Focus engines.

[/color]

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896991
Share on other sites

I've been looking around at a few, but the quality of the build varies greatly. Some people seem to think "zip ties" make great structural braces!

A consistent difference with a lot of these kits seems to be the availability of independent rear suspension as an option. My belief that for pure circuit work, a live rear axle will be just as good. Anyone care to disagree?

As an aside, I recall reading about a "Radical" in a Euro magazine a while back. These are along the same lines as a clubman, but full bodied. GSX-R turbo & NA powered I think, and HEAPS quicker than Porsche GT3 RS, Lambo etc... But WAY too expensive for what it is. An Ariel Atom looked cool to, powered by the latest Civic Type R engine.

skylinegeoff, I kinda agree with your thought that a clubman is sort of "cheating" when it comes to comparing with "real cars", by not dragging around all the heft road cars have to.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-906943
Share on other sites

Remember the Catheram took the lap record at Nurburgring from either Porsche Turbo or GTR and they were all excited. Good stuf but they are comparing a toy with a car with full comforts so I wasn't that impressed. Still a good drive though. Almost as good ast pete (fats) in the "little renault"

 

Yeah one of those would be wicked.

Caterham's are absolute track weapons -- 0-100 in 3.4 seconds:

http://www.caterham.co.uk/showroom/sevens/.../superlight.htm

But as you said, that's basically all they are good for: would be horrible to try and use one as a dialy driver.

If you flushed with cash I would probably choose a Lotus Elise: its still hard core, but at least it has a roof! Car and Driver did a track car roundup this month too:

http://www.caranddriver.com/article.asp?se...article_id=8202

LW.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-906974
Share on other sites

Good price, but they are fiercly unreliable at that power level. There is a massive amount done to it though so it would be nice just to have in the garage.

Would be worth it except for the hairdresser image. :)

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-908369
Share on other sites

Most of you would have looked @ that J-Spec Celica, seems a lot of gear for the money, even if it needs a rebuild (that I can do myself if I get excited).

Do you think that's a reasonable car to think about? Are they really designed for that power level? Would I be able to drive it to the track legally?

I've been lookin and thinking, but would appreciate your thoughts.

Or wait for a good Clubman?

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-910644
Share on other sites

My thoughts are its a heavily modified car, so you could spend forever trying to work out what parts might be causing problems, particularly since you didn't make the modifications yourself and I doubt they are documented.

The owner seems to have gone all out... how much of the stuff added actually improves upon the base car you would never know without stripping it all off and trying piece by piece.

As for the legalities, I doubt it could be made road legal even if you were allowed to import it without a CAMS license.

Have you thought of an Evo or WRX race car? A number of these have come up recently and they are quite cheap: you would need a CAMS license to bring them in though and they aren't road registerable. :rofl:

Edit: you could always buy a road legal Evo/WRX/whatever shell and switch all the parts from the JP car.

LW.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-910661
Share on other sites

Most of you would have looked @ that J-Spec Celica, seems a lot of gear for the money, even if it needs a rebuild (that I can do myself if I get excited).

Do you think that's a reasonable car to think about? Are they really designed for that power level? Would I be able to drive it to the track legally?

I've been lookin and thinking, but would appreciate your thoughts.

Or wait for a good Clubman?

I reckon an unknown modified jp celica with a blown motor is among the worst you could buy.

First decide what you want a car for.

If its club/open track days, then maybe buy a stock(ish) jp import.

If you want a quick race car buy something already here and proven like an improved production car - second hand race cars are great value and all the expensive and hard work is already done. Cars like the celica are not eligible for *any* type of racing in australia

If you want a long list of mods to impress your friends buy the celica.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-912061
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...