Programming A New Key For V36

[Zveruga]

well, you can't really buy Consult III either. Nevertheless, the same ebayers who sell Consult also selling both Immo and GT-R cards.

[Eye Candy]

Guys you need the PIN and Consult III, can only get the PIN via Niscom, unlike a V35 for example where the code is on the BCM

[ahxching]

Had same problem as u, went to ferntree gully, they couldnt do it, went to glen waverly couldnt do it, called up infiniti wouldnt even talk about after market cars.

Finally went back to the actual importer and they already had my key there waiting....

[The Max]

Guys you need the PIN and Consult III, can only get the PIN via Niscom, unlike a V35 for example where the code is on the BCM

That's good news then. So the 4-digits stamped in a little metal plate that came with my keys from Japan must be my PIN code. Guess I don't have to get the Immobiliser card for my Consult 3+ after all.

In which case, what is the Immobiliser card for then? For replacing a faulty BCM with a new one or am I completely off track?

[Zveruga]

Had same problem as u, went to ferntree gully, they couldnt do it, went to glen waverly couldnt do it, called up infiniti wouldnt even talk about after market cars.

Finally went back to the actual importer and they already had my key there waiting....

did they make a new key? if yes, can they do another key?

[ahxching]

nah the person who bought the car off the importer just didnt go back to get the 2nd key, so he had the 2nd key waiting at the importer, but i did ask the importer guy if i need another one, can i go to him and he said yes, but he does seem abit dodgy to be honest lol.
While trying to get it sorted, Nissan japan did contact Nissan Australia customer service(over the phone) and apparently i can get the key coded, but I need to let the customer service people know first so they can "assist" in the dealer in getting the key coded, and what i was told by nissan glen waverley and ferntree gully is a 20digit pin code, which keeps changing everytime u log back into the Consult software...

[The Max]

Keeps changing? Sounds like a rolling RSA type of code. Interesting.

[Zveruga]

Challenged my luck today with Burwood Nissan. Although guys were friendly and willing to help, they couldn't program the key. What I was told, they tried the K13 and Z34 programs and found those only accept 5-digit codes, whereas the car was requesting the 20-digit code, so even if they knew the key, they couldn't type it.

Any ideas (other than driving to Adelaide) appreciated.

Edited February 6, 2014 by Zveruga

[nickcorr]

So restarting an old thread...

So basically you need a consult3 like this

http://www.ebay.com.au/itm/281266331553?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

and the NATS stuff like this

http://www.ebay.com.au/itm/111259157910?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

and a new or could it be a used key? Would this one work?

http://www.ebay.com.au/itm/171288573726?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

And you should be good to go? Or am I missing out a whole heap of extra steps?

Edited April 6, 2014 by nickcorr

[nickcorr]

Or would this key be more likely to work?

http://justjap.com/index.php/genuine-nissan-key-remote-nissan-r35-gtr.html

[Chris Rogers]

set the C3 into DOMESTIC MODE and it will go.. IF they have the code then this works.

[nickcorr]

And if you do not have the little code from the key tag.....

[Chris Rogers]

get them to look it up. dealer may be a bit bitchy about it but they can do it.

[nickcorr]

Just got an email follow up to some of the enquiries I have been making..

One of them has bought the software he thinks he needs to get his consult 3 to program keys...

Will let you know how I get on...

[Zveruga]

Okay I found a guy in Melbourne who is willing to make the key and has the software but we could not get the PIN for the system. He has some Nissan PIN calculator which I seen in many locksmith shops around but the PIN it produces is not being accepted by the car. Does anyone know how to get the PIN for the car? I remember that for V35 PIN could be read from BCM directly using some smart software but not sure if it's true for V36.

[Zveruga]

Success story, finally. Frank from Luxury&Performance vehicles, Bayswater can definitely do keys for V36 series 1 (which is VQ35HR, 350GT). Not sure about 370GT, though.

[nickcorr]

Not for KV36...

I just need to get the correct PIN generator for MY09 and newer.. It is the one that generates 2 PINs, old and new...

[nickcorr]

Just got an email from Frank, he has his new PIN generator installed (needed to get an XP PC), and has generated what he thinks is the correct code for my car...

Hopefully I will have time to see him next week to try to get the key programmed...

[cantfindabetterdan]

Thanks for putting me onto Frank, while I haven't got my key done yet he is confident he can do it (and his yard is full of v36's so chances are he knows what he's talking about)

I need to get a new fob though, Frank offered to sell me an old one for 200 but given you can get infiniti ones for as little as 60 delivered from the states i figured there is a cheaper way. Does anyone know where to get them from?

I saw one ad from synergy motorsports for 185$

anyone?

thanks

[Zveruga]

I am not sure about Infiniti keys, they may or may not work.

I ordered these parts for my PV36 from Amayama, which I took from FAST according to my Frame No:

KEY Nissan H0564EG010

SWITCH Nissan 285E3JK05A

All for $110 including delivery.

Frank made this new key work with the car in no time.