Jump to content
SAU Community

How To Install Boot Lip And Roof Wing?

V28VX37

By V28VX37,
in Exterior & Interior Styling

 Share

Recommended Posts

V28VX37 Veteran

V28VX37

Posted
Posted

So my Origin boot lip and roof wing arrived from Japan via Streeter this week, yay!

What's the recommended way to prep these things? It's glossy black FRP, I saw somewhere that a light sand, primer and paint (maybe two coats) is all you need, is that right?

What about mounting them? Double sided tape, polyurethane, sikaflex, something else - what do you use? I'd prefer something that can come off a couple of years later without ruining the paint/glass..

The roof wing is a solid fit against the rear glass, the boot lip is ok but may need a bit of sanding in the middle to sit tight.

With the colour, I'm thinking of going gloss black for both, to kind of complement my matte black front lip (and the awse weather shields :) :

11905068066_c6f0822022_z.jpg

This is pretty close to what I'm after (from JDMST):

post-35403-12695160632106637524.jpg

The alternative is body colour, it's classier but I kind of like the drift look above:

mg6597edit.jpg

What says you?

-Tom Community Regular

-Tom

Posted
Posted

You should be fine to use sikaflex or some similar adhesive. Grab a caramel wheel to get it off when/if you want to get the sikaflex off.

I used a wheel on (at least) 5 year old sikaflex that was hardened and it worked a treat.

Bought mine for $15 off ebay.

V28VX37 Veteran

V28VX37

Posted
  • Author
Posted

You should be fine to use sikaflex or some similar adhesive. Grab a caramel wheel to get it off when/if you want to get the sikaflex off.

I used a wheel on (at least) 5 year old sikaflex that was hardened and it worked a treat.

Bought mine for $15 off ebay.

Thanks mate.

Any suggestions on how to prep and paint the FRP material properly?

  • 2 weeks later...
V28VX37 Veteran

V28VX37

Posted
  • Author
Posted (edited)

Managed to get this done over the weekend, the prep was a bit tedious and I managed to get Sikaflex all over the place when mounting but it turned out alright. I might do a proper write up later on. Here's some quick shots prior to any wash/wax/polish, I'm hoping to get a bit more gloss once that's done:

EDIT: Does anyone know where to get a decent high mount brake light for the rear window? I don't think a parcel shelf one will work as it's obscured by the rear wiper...?

12285182773_2cce8a79ae_c.jpg

12285182153_c16020d2dc_c.jpg

12285452044_7a749139f2_c.jpg

Edited by V28VX37
  • Like 2
V28VX37 Veteran

V28VX37

Posted
  • Author
Posted

I plastidipped my weather shields, one of those wings would tie in nicely in black

Good idea, did you have to pull them out for that?

I'm thinking black bonnet now too, although that could be a step too far...

Chris32 Veteran

Chris32

Posted
Posted

Good idea, did you have to pull them out for that?

I'm thinking black bonnet now too, although that could be a step too far...

Nah just masked it up with newspaper and tape post-493-13922029314971_thumb.jpgpost-493-13922029469582_thumb.jpg

  • Like 1
V28VX37 Veteran

V28VX37

Posted
  • Author
Posted

Not bad!

Turns out I didn't do the best job with sikaflexing the boot lip and it started coming apart at one end :/ Anyhow I pulled it off and spent an afternoon cleaning up the polyurethane ... and ended up painting the lip body colour whilst it was off the car :) It's yet to go back on, will post a photo once it's done.

V28VX37 Veteran

V28VX37

Posted
  • Author
Posted

Some photos below of how the boot lip looks after I changed my mind about the colour.

Couple of tips for anyone wanting to mount theirs properly:

  • Make sure the fit is good before priming and painting. I ended up sanding back the inside middle section for a better fit before repainting the whole thing...
  • Do not go anywhere near the edges with Sikaflex. On the first go I went maybe 10-15mm from the edges and a fair bit squirted out, it's a prick to clean. Second time 20mm or so away and it was pretty good all around. Also, do not try this on a 40 degree day like I did the first time around, it will not cure properly.
  • Second time I used 2 ratchet straps to pull the lip forwards and down at each end, plus a plank sideways across the whole lip, held down but clamps at each end. Let it sit for 48 hours. Much better.
  • Oh and I didn't find any way to get a proper glossy finish at home (black or coloured, with or without clear coat), I reckon you need to bake the paint for that. Oh well.

12631914064_94296993c4_c.jpg

12631915134_01270c5200_c.jpg

  • Like 2
  • 1 month later...
V28VX37 Veteran

V28VX37

Posted
  • Author
Posted

Thanks guys! Yeah definitely test for fitment before mounting, much quicker than fitting it twice...

Mine's stayed on perfectly for two months now. Here's a behind the scenes shot, I let it sit like this for 48 hours to cure properly:

13892957373_d4692873d1_z.jpg

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...