Jump to content
SAU Community

Recommended Posts

Hi all,

A "car won't start" thread. Hopefully you all can point me in the right direction.

Car: 1991 R32 GTR

Condition: Car turns over (cranks) but won't start.

Car died while driving. It was low on gas at the time so I assumed the fuel had run out. Topping it up with 10L didn't help, so I assumed fuel pump or fuel filter. Clean fuel is coming out the top of the fuel filter and the fuel pump primes, so it's OK there.

Facts:

  • First three cylinders have spark (only tested the first three)
  • Injectors are clicking (simple metal to injector and listen test proves that they are doing some work)
  • Fuel is pumping from the top of the fuel filter
  • ECU shows no error codes (all fine)
  • All fuses are OK

I considered AFM or air being an issue, but that wouldn't stop the car from firing up. The fact its turning over, fuel is pumping and the spark plugs have spark indicate that the ECU must be OK.

Does anyone have an idea of the next place to look?

Link to comment
https://www.sau.com.au/forums/topic/438667-car-wont-start-r32-gtr/
Share on other sites

This might sound silly, but, were you driving hard when it cut out? Only reason I am asking is, if you have a big air leak, ie intercooler hose popped off, then it will crank and crank but almost never fire.

Another thing when you checked for spark, how did the spark plugs look? clean?

And try to take off the fuel line and prime the car, fuel will come out.

But by the sounds of things, I think you are not getting fuel.

Another thing, do you smell fuel in the bonnet after cranking it?

I'd be checking for air leaks or the afm wiring seeing as you have fuel and spark. Even if your fuel pump was stuffed but still providing some pressure you will get it to start, maybe not idle after that though.

Anyway, check all intake joiners Id reckon

Thanks for your input!

#@Hadouken I was actually giving it a bit of boost when it cut, so you might be on the money there.

I've had a good look around and can't spot any big holes in the air hoses around the front area of the car. Its had a Trust intake upgrade at some stage, but a few of the joiners are showing wear. No big holes though.
I'll jack it up and check the back end (turbo area) and properly look over the AFM tonight.

Spark plugs look in good condition. Have run around 2000km on them (NGKs).

I've pulled the fuel rail and injectors off and fuel is definitely getting through the injectors (the fuel poured out of the first injector when the fuel pump primed). Will get them flow tested while they're out.
I've also tried manually turning the CAS with the injectors unplugged and a little fuel in the block and it's detonating, so I'm guessing CAS or air is the right place to be looking.

I'll update you when I can.

Would that not be your problem? Fuel should not pour out of an injector that is not supposed to be open.

Good point...! I'll need to double check whether it was pouring out when priming or when cranking.

What do you mean it's detonating when you turn the cas by hand? Why do you think something is wrong with the cas?

CAS was suggested above. There is a little fuel leftover and when turning the CAS the fuel is being ignited. Detonating is probably the wrong word - its igniting with a bang and burning up the fuel (flames out the injector holes) which I expected.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...