Jump to content
SAU Community

Recommended Posts

I can drive past 180kph on my car and a little over 190.[from my own judgement] after 190ish it wont go up anymore...

is that speed cut? but i doubt it as i imagine it to be just at 180 kph.

planning to get a RSM if mine really has a speed cut... of 190 that is...

feedback appreciated .

thanks

Link to comment
https://www.sau.com.au/forums/topic/439331-r33-speed-cut/
Share on other sites

If you fit a motec exhaust it eliminates the factory speed cut. I'd probably look at a bigger top cog in the auto too mate. They are always pretty short hey.

While he's doing the top cog is it worth spending the extra to convert to flappy paddle?

Link to comment
https://www.sau.com.au/forums/topic/439331-r33-speed-cut/#findComment-7204386
Share on other sites

yes im not from around here...

not that i really need it to go beyond 180... i just wanted to make sure mine has the speed limiter... but wasnt sure because i gets past 180...

Because your speedo is out by 10k's at 180.

Link to comment
https://www.sau.com.au/forums/topic/439331-r33-speed-cut/#findComment-7205484
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...