Jump to content
SAU Community

Recommended Posts

In all seriousness, it's very difficult to compare even similar cars on the same dyno.

There are so many factors.... and honestly, all you can hope for is that your car reaches it's intended potential at that time in that configuration.

After chasing my ass more times that I can count trying to reach theoretical power figures, my attitude to dyno tuning now is 'It makes what it makes, just make it safe'.

I've seen variations of 50-60rwkw on my own car in the same or very very similar configuration on the same dyno/operator due to weather and temperature only.

... flattening off like that may indicate that there is a restriction present other than the turbo.

I'd be looking at a boost restriction across your cooler core/pipework, drop the exhaust for the dyno, new plugs and thinish oil, smaller wheels (if you have hecktic 22 inch chromies), clean AFM, clean air filter, check base timing and check cam timing and fresh full tank of fuel.

If there is no significant drop in pressure accross the cooler core, significant pressure build up in your exhaust, significant vac in your intake or mechanical fault, then regardless of what the dyno says (and assuming the operator/tuner know what they're doing) then your car is getting towards the top end of it's potential for it's given configuration.

... now if you want bigger numbers. Get a bigger turbo on a bigger engine with a lighter drive train on smaller wheels on a cold ass day with a silly ramp rate and a little temp correction for good measure.

Or... enough nitrous will fix just about anything.

J.

  • Like 1

Yer i understand at the end of the day its just a number but i was still kinda hoping for that magic number in my head

Injectors are gtr ones.

The tuner did mean the tyres on the rollers but he has only seen it happen on big power cars anf normally it frys rubber.

The wheels are only 18. But brand new tread 275.. everything else was brand new service wise...

And being a rb20 i wasnt expecting huge numbers. But at least a little more. It still drives good for what it is.

... now if you want bigger numbers. Get a bigger turbo on a bigger engine with a lighter drive train on smaller wheels on a cold ass day with a silly ramp rate and a little temp correction for good measure.

I have personally seen a poo-brown old style VW beetle run 295rwkw on the dyno. It was a friend's car and I'm sure he still has a printout. When we had all finished falling about laughing the dyno operators did a real run and it got 25kw. So it's trivial to manipulate the dyno settings to get a particular result.

It does look like you are hitting a flow limit, because power ramps up and then suddenly gets capped. Make sure the turbo intake pipe isn't sucking shut, shouldn't happen at those power levels but you never know.

  • Like 1

Just my 2c, I had owned my r33 gtst for a while, Starting at 200rwhp. In the end it had an aftermarket turbo and all that stuff and i could easily feel the difference in power after every time it was dyno tuned. The most it made was 385rwhp on a roller dyno. I later had it tuned on another roller dyno making 335rwhp with pretty much the same boost and that was the quickest it ever felt..

275's wont help it lol thats a huge tyre for any car to turn over

dynos are for tuning and thats it. I wouldnt be too concerned. If your really worried go back and ask them to put the inlet temp sensor next to your exhaust,i am sure you will be happier with the power the car makes

ahh that sucks to hear, sorry mate. The car should still feel pretty zippy on boost though. But you might break something soon. Also, when you go to the dyno throw your stocker wheels on with 205's of a hard rubber. Trust me fresh 275's are too wide and too soft for the dyno you WILL be losing out on your power reading.

you can run stable afrs and still detonate....

Yep.

But your question suggested that the car was running out of fuel, either inectors or pump not supplying enough.

which is clearly not the case.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...