Jump to content
SAU Community

Recommended Posts

Hey guys,

Was driving the GTR around the other night and just as I came on boost the hose from the turbo manifold to the intercooler came straight off. I reattached it and clamped it back on but is still running like it wasnt reconnected, I had a look at the pfc hand controller and the air flow graph was all over the place and would eventually just stall

I disconnected the AFM, started the car and it instantly stalled. I reconnected them and tried starting it again, same as before I disconnected them.

Ive had a look at the cooler piping and all seems to look okay, as much as you can see through the bumper vents.

Could there be something wrong with the AAC valve or something a bit more serious?

Going to pull the front bar off and have a better look over the weekend, but any suggestions in the meantime would be a massive help!!

Cheers

Link to comment
https://www.sau.com.au/forums/topic/440773-rb26-running-rough-as-guts/
Share on other sites

An update on the situation...

I took the piping that popped off right off to see if the silicone split and there was no spliting. I shone a torch down to the intercooler inlet piping and to my misfortune there is a BUCKET TON of metal shavings.... Ohhhhh man..... Fml

I was hoping you'd say an intercooler pipe was rubbing and had worn.

one way to find out about the turbos. post a photo if you can take one. Hope your motor is okay

Im taking it down to allsparks performance later in the week to get Frank to go over it and provide me a better indication of what is going on.

Its doing similar stuff to when the first coilpack shit itself, but seeing those shaving really makes me worried. I dont know if.the previous owner had his turbos go and its just residual flakes from when they gave way and have just stuck to the blowby oil in the piping or what it is

Best case scenario, im up for some new coilpacks, worst case... You can imagine

.

  • 2 weeks later...

So turns out, no blown turbo, THANK GOD! The "filings" was simply the reflection of the light reflecting off the ripples in the blowby off the silicone piping haha!!

Damien from G6 motorsport had it all day and couldn't figure out what was wrong with it.

He had a look at the spark plugs and they were disgustingly black.. Simply from when the cooler pipe popped off and the mixture in the cylinders not being what the computer was programmed for and fouled out 4 of the 6 plugs. New set of plugs and away she goes, back to normal!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...