Jump to content
SAU Community

Recommended Posts

Hi guys,

I thought I'd post up some pics of a pair of headlights I repaired and restored. They arrived to me in average condition with damaged rear housings, some severe yellowing and previous internal lens coating work.

The damage on the rear housing was tidied up and the sharp broken edges were cut away. Some new plastic of a suitable shape was found and cut out to suit. Once I was happy with the shaping, I plastic welded the replacement plastic into place.

(The green is a ball of tape to stop any cut off plastic falling into the housing)

IMG_4372_zpsd6fdc8fd.jpg

IMG_4373_zpscfe5ef49.jpg

IMG_4374_zpse8883920.jpg

The outside of both lenses were wet sanded, starting off at 1500grit and working up to 2500grit (In the future I would go up to 3000grit).

IMG_4379_zps66cc4331.jpg

This revealed the coating on the inside of the lens which meant the headlight had to come apart. It's hard to see, but there is an odd shape on the surface. That is where I've started wetsanding. Once done I then polished the inside of the lens.

IMG_4413_zps0aca7d95.jpg

IMG_4412_zpsc266c65b.jpg

The reflectors and internals were given a tidy up and the loose indicator lenses were fixed into place. Here they are back together ready for external polishing.

IMG_4415_zps2e2373d9.jpg

I used Scratch-X to begin with and worked my way up from using Menzerna 1000, 2500, 5000.

IMG_4417_zpsb5e34040.jpg

IMG_4418_zpscda2c9a8.jpg

From this they were then hit with Menzerna UF, followed by 4 layers of AMMO Skin and AMMO Creme.

IMG_4437_zps6ca87839.jpg

IMG_4438_zpsbb76bd14.jpg

IMG_4439_zpsa6bbc0b9.jpg

IMG_4440_zpsdc87f76d.jpg

Enjoy!! :D

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/440962-r34-headlight-restoration/
Share on other sites

Thanks for the kind words guys. As has already been explained, the headlights can be removed with either a hot air gun or a putting them in the oven. I prefer to use a hot air gun.

excellent! i'd love to carry out these restorations, as buying good condition headlights are so expensive, and all it takes is a little time to fix up a damaged set. great work mate

Thanks mate. A little time and effort gives the best results ;)

we need ppl like you in sydney :(

Cheers. Shoot me a PM ;)

Great work on the 34 head lights btw

Thanks mate.

  • 1 month later...
  • 4 months later...

Hows the protectabt holdng up...i fond the heat from.the lights just tends to burn it off very quickly...

Really need to let some proper UV protectabt on there because once you strip off the coating it will cause them to yellow from.the inside out...

Have also heard about clearcoating them, haven't tried it tho...but a clear heatpeoof paint should work well in theory..

  • 2 weeks later...
  • 1 year later...

Rubbing the lenses back and clear coating them is the best option.

Digging up an old thread here, getting desperate.

Mine are pretty bad, followed a lot of advice via SAU and my mechanic who reccomended to buy a headlight restoration kit, but much of the discolouration is on the interior, not exterior.

I've just tee'd up a cut and polish for mine (black, looking very dull at the moment) and was wondering who might be able to do this work for me as I'm not that comfortable whacking parts of my car in the oven :P

Digging up an old thread here, getting desperate.

Mine are pretty bad, followed a lot of advice via SAU and my mechanic who reccomended to buy a headlight restoration kit, but much of the discolouration is on the interior, not exterior.

I've just tee'd up a cut and polish for mine (black, looking very dull at the moment) and was wondering who might be able to do this work for me as I'm not that comfortable whacking parts of my car in the oven :P

I've never seen them fade on the inside. If they're that stuffed, find a replacement set.

Digging up an old thread here, getting desperate.

Mine are pretty bad, followed a lot of advice via SAU and my mechanic who reccomended to buy a headlight restoration kit, but much of the discolouration is on the interior, not exterior.

I've just tee'd up a cut and polish for mine (black, looking very dull at the moment) and was wondering who might be able to do this work for me as I'm not that comfortable whacking parts of my car in the oven :P

Where are you located mate?

  • Like 1

Where are you located mate?

Latrobe Valley, Victoria - had a recent cut and polish done, cherry glaze etc (came up a million bucks) and spike of the lights, was quoted 100 per light. Sound about right? Not sure if that's interior or exterior.

I know some of these guys are just gonna be like "get new ones" but id rather have a crack at another solution before I dish out bulk coin because they are quite expensive

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...