Jump to content
SAU Community

Recommended Posts

Hi guys,

I thought I'd post up some pics of a pair of headlights I repaired and restored. They arrived to me in average condition with damaged rear housings, some severe yellowing and previous internal lens coating work.

The damage on the rear housing was tidied up and the sharp broken edges were cut away. Some new plastic of a suitable shape was found and cut out to suit. Once I was happy with the shaping, I plastic welded the replacement plastic into place.

(The green is a ball of tape to stop any cut off plastic falling into the housing)

IMG_4372_zpsd6fdc8fd.jpg

IMG_4373_zpscfe5ef49.jpg

IMG_4374_zpse8883920.jpg

The outside of both lenses were wet sanded, starting off at 1500grit and working up to 2500grit (In the future I would go up to 3000grit).

IMG_4379_zps66cc4331.jpg

This revealed the coating on the inside of the lens which meant the headlight had to come apart. It's hard to see, but there is an odd shape on the surface. That is where I've started wetsanding. Once done I then polished the inside of the lens.

IMG_4413_zps0aca7d95.jpg

IMG_4412_zpsc266c65b.jpg

The reflectors and internals were given a tidy up and the loose indicator lenses were fixed into place. Here they are back together ready for external polishing.

IMG_4415_zps2e2373d9.jpg

I used Scratch-X to begin with and worked my way up from using Menzerna 1000, 2500, 5000.

IMG_4417_zpsb5e34040.jpg

IMG_4418_zpscda2c9a8.jpg

From this they were then hit with Menzerna UF, followed by 4 layers of AMMO Skin and AMMO Creme.

IMG_4437_zps6ca87839.jpg

IMG_4438_zpsbb76bd14.jpg

IMG_4439_zpsa6bbc0b9.jpg

IMG_4440_zpsdc87f76d.jpg

Enjoy!! :D

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/440962-r34-headlight-restoration/
Share on other sites

Thanks for the kind words guys. As has already been explained, the headlights can be removed with either a hot air gun or a putting them in the oven. I prefer to use a hot air gun.

excellent! i'd love to carry out these restorations, as buying good condition headlights are so expensive, and all it takes is a little time to fix up a damaged set. great work mate

Thanks mate. A little time and effort gives the best results ;)

we need ppl like you in sydney :(

Cheers. Shoot me a PM ;)

Great work on the 34 head lights btw

Thanks mate.

  • 1 month later...
  • 4 months later...

Hows the protectabt holdng up...i fond the heat from.the lights just tends to burn it off very quickly...

Really need to let some proper UV protectabt on there because once you strip off the coating it will cause them to yellow from.the inside out...

Have also heard about clearcoating them, haven't tried it tho...but a clear heatpeoof paint should work well in theory..

  • 2 weeks later...
  • 1 year later...

Rubbing the lenses back and clear coating them is the best option.

Digging up an old thread here, getting desperate.

Mine are pretty bad, followed a lot of advice via SAU and my mechanic who reccomended to buy a headlight restoration kit, but much of the discolouration is on the interior, not exterior.

I've just tee'd up a cut and polish for mine (black, looking very dull at the moment) and was wondering who might be able to do this work for me as I'm not that comfortable whacking parts of my car in the oven :P

Digging up an old thread here, getting desperate.

Mine are pretty bad, followed a lot of advice via SAU and my mechanic who reccomended to buy a headlight restoration kit, but much of the discolouration is on the interior, not exterior.

I've just tee'd up a cut and polish for mine (black, looking very dull at the moment) and was wondering who might be able to do this work for me as I'm not that comfortable whacking parts of my car in the oven :P

I've never seen them fade on the inside. If they're that stuffed, find a replacement set.

Digging up an old thread here, getting desperate.

Mine are pretty bad, followed a lot of advice via SAU and my mechanic who reccomended to buy a headlight restoration kit, but much of the discolouration is on the interior, not exterior.

I've just tee'd up a cut and polish for mine (black, looking very dull at the moment) and was wondering who might be able to do this work for me as I'm not that comfortable whacking parts of my car in the oven :P

Where are you located mate?

  • Like 1

Where are you located mate?

Latrobe Valley, Victoria - had a recent cut and polish done, cherry glaze etc (came up a million bucks) and spike of the lights, was quoted 100 per light. Sound about right? Not sure if that's interior or exterior.

I know some of these guys are just gonna be like "get new ones" but id rather have a crack at another solution before I dish out bulk coin because they are quite expensive

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...