Jump to content
SAU Community

Recommended Posts

Fairly new to skylines as ive only had my r33 for about a month. I want to have a crack at drift but the stock viscous lsd is very loose and unpredictable. I've done a bit of research and from what I've read the viscous lsds aren't worth wasting money on (correct me if I'm wrong).

So what are my best value for money options considering the car will still be driven on the road from time to time. ( I have no interest in welding my diff I'd rather do it right and do it once)

- Buy an new aftermarket lsd such as kaaz, nismo, cusco (expensive. Are they worth the money?)

-buy a second hand diff with aftermarket lsd installed from an importer. ( a little less expensive and lsd is already installed but worried I will get one that's worn out and needs rebuilding which could get costly)

- from what I have read Gtrs had a mechanical 2 way that works well when shimmed/rebuilt will these fit in a gtst how much work is involved and what kind of money would this set me back.

Any advice from someone with experience would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/441360-r33-gtst-lsd-diff-options/
Share on other sites

Lots of guys into drift run a 2 way but either will suit your purposes really. All of the above-mentioned brands would be fine as they are tried and tested. Kaaz have good support and make all the clutches etc. available for rebuild if it becomes worn out down the track, unsure about availability of the others.

As above, most drift guys will likely run a 2 way over a 1.5 way.

I bought my Kaaz 1.5 way diff centre second hand from Yahoo auctions Japan and had it shipped over through Jesse Streeter. I think the 2 way diffs were even less as there were more around than the 1.5 ways when I was looking.

Cost me a bit less than $500 delivered. Had it refurb'd and reshimmed locally, then installed into my existing diff housing. Cost me around $1000 by the time it was in my car.

Diff is super tight and haven't looked back!

Best option is R34 helical. Found on later model coupe GTT only R34 manual. Good luck !

Won't need rebuilt, better street diff than clutch-type but not as good for 100% balls-out lifted wheel action on a track.

My mechanical is noisy. It makes the inside wheel skip and chatter on turns, and gives the car a good shake when cold.

It's not a daily driver though so I don't mind it.

Throw in OS GIKEN 80W-250. Calmed down my GT Pro by 90%.
  • 2 weeks later...
My mechanical is noisy. It makes the inside wheel skip and chatter on turns, and gives the car a good shake when cold.

It's not a daily driver though so I don't mind it.

Add limslip or use Nulon SAE90 GL5 oil. Mines pretty good and you don't even notice it half the time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...