Jump to content
SAU Community

Recommended Posts

Hi, my engine recently dropped compression on 2 cylinders and I suspect cracked ringlands due to the smoke and blowby. I was wondering if someone could have a look at the tune on the ECU and give feedback on it. Thanks.

RB25DET, stock turbo 12psi, Link G4

http://www.mediafire.com/view/5dd7jagfhxsuz51/skyline.pcl

Link to comment
https://www.sau.com.au/forums/topic/441788-feedback-on-tune/
Share on other sites

The car did 10 laps around the track before I noticed oil all through the intercooler piping, no catch can at the time. Did a compression test, 155-160 on all six.I installed a catch can and noticed it filled 1 litre with just hard street driving and one night at the drags. Did a compression test and cylinders 1,2 dropped down to 115, and 130.

post-85181-0-44009500-1397251231_thumb.png

post-85181-0-83081400-1397251235_thumb.png

For reference here is discopotato03 s tune on e70. From his home tuning viper link thread.

You have more timing than that in certain areas,which I would say is your problem.

http://www.skylinesaustralia.com/forums/uploads/monthly_12_2013/post-9594-0-57536600-1386075732.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...