Jump to content
SAU Community

Recommended Posts

Hey guys so i have this project in plans to start soon, just want to get peoples ideas and though in where ill run into problems and clear up a few things for me.

1. So i currently have a 1994 series 1 manual r33 with new forged motor and td06 turbo, greedy style intake manifold and haltech pro. Its also got factory ABS

2. I want to buy a r34gtt coupe and pull the motor and box out of the r33 and put it in the r34. I found a AUTOMATIC R34 with nistune in pretty good conniption which I'm most likely going to buy for this project.

3. I will be putting the neo motor in the r33 plus buying a manual box for it and sell it off

4. Both cars will be street cars

As far as i know the neo has vct, reverse car wires, different intake and ignitor built in the coil packs. The ecu plugs i know are different too

So from here i want to know wats the easiest way to wire in the r33 motor in the r34? can i use my r33 haltech on the 34???

Also wats the best way to wire the neo in the r33? also what ecu can i use? would prefer a stock ecu

ANY help would be greatly appreciated.

Also I'm thinking of doing it all or most myself in my garage, I'm not a mechanic nor i have done engine swaps before, but i kind of know my shit..

I would hold out for a manual GTT pull both engines and swap the blocks. I assume you will be able to use the Haltech (don't really know) on the Neo so will will need a stock ecu for the R33.

Wouldn't it be easier to buy a Manual GTt and sell your R33 ? No spanner work and R34s had lots of detail updates worth having . Styling is a personal thing and some may not like R34s . I originally wanted an R32 with R33 running gear but it was easier to buy a 33 than build an R32 GTS25T .

A .

Well idealy id want a manual 34 but auto I cant find one for almost half the price of a manual.

Id keep the 33 head as its been rebuilt and bigger cams etc

Overall I calculated after sorting the 33 and selling it the whole project would cost me.less than 10k inc the car id add another 2k factor of safety I think its worth it a forged 300+kw 34 for that price.

I know a mechanic that would swap the motors for just 500 for both cars I just have to do the wiring. So yea the wiring is my biggest concern at the moment.

Just do a straight swap then = the Neo motor + loom + nistuned ecu (and manual box) into the R33 and the R33 engine, box, Haltech and loom into the R34 that should pretty much run and there might be a few small wiring issues to sort out. Not many people would put an R33 engine into an R34 unless it was an RB26DETT

Just do a straight swap then = the Neo motor + loom + nistuned ecu (and manual box) into the R33 and the R33 engine, box, Haltech and loom into the R34 that should pretty much run and there might be a few small wiring issues to sort out. Not many people would put an R33 engine into an R34 unless it was an RB26DETT

That way would my cluster, aircon stuff, accessories, ABS, traction control and most importunely the airbag on the r34 work?

That way would my cluster, aircon stuff, accessories, ABS, traction control and most importunely the airbag on the r34 work?

If they don't they are the small wiring issues that you have to sort. Speedo may read wrong unless the senders are interchangeable.

Speedo is the same and easy. ABS may be less so. Traction control won't work unless you move the ABS/traction computer over as part of the swap because R33 has ABS but no TRC, and of course R34 has both.

Airbags are a separate system.

Air-con I don't know if it differs between R33 and R34. I know it does differ between R32 and R34.

I dont get why you want to put a forged 33 "25" in a 34 and the NEO "25" in the 33. Just buy a manual 34 GTT and sell the 33 as is. The 34 NEO "25" is good for 400rwkw on the CORN JUICE anyway tried and tested many times at 350-400wkw that I know of. And if your worried just slap some forged slugs in and prep the rods and some ARP rod bolts and your good for 400 waspa day in day out. Got to go sorry if only makes half sense in a hurry :(

Cheers Josh

The 33 motor is almost brand new, I know the neo ia better than the 33 motor stock to stock but im preety sure forged 33 rb25 is much better than the neo.

Anyways I know if u put an older engine thats a different type needs engineers certificate but if its the same type it should be fine.

Btw the haltech on the r33 has traction control function .. can I match it to the 34 maybe?

^^ Ben speaks the truth, no amount of certificates will make it legal, the epa will only allow a newer engine than the car came with to be installed, unless you run straight LPG and remove the entire fuel system (as far as I know.)

i just found out the block used for the build was a 1996 series 2 but head is a series 1. Anyways i think ill just go to a remote vicroads in the bush and if the needed engineers certificate ill just pay the 500 and get it. Shouldn't be problem for emissions with e85 right?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...