Jump to content
SAU Community

Recommended Posts

$200 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$200 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position

$40 2x Falken Azensis RT615 225/35/17 with around 3mm tread

$50 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

$200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece
$20 RB25DET S2 Factory dump pipe & down pipe

$20 RB25DET/RB20DET Factory Manifold
$50 RB25DET S2 AFM
$20 RB25DET S2 Stock Blow Off Valve
$20 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$200 RB25DET S2 ABS Diff - minus ABS sensor
$30 RB25DET S2 Stock Anti Roll bars / Sway Bars
$20 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods

$20 SR20DET S15 Radiator

Location: Pick Up Canley Vale, NSW 2166

Contacts: PM or Reply Here

Will happily trade for beer.

Old Ads (Photos etc.):

http://www.skylinesaustralia.com/forums/topic/441585-fs-syd-6x-yellow-jackets-r33-gts-t-s152-rb25det-r34-gt-r-rb26dett-wgnc34-s1-rb25det-ignition-coil-packs/

http://www.skylinesaustralia.com/forums/topic/440769-fs-syd-npc-carbotic-clutch-disc-near-new-rb25det-s2-stock-turbo-r33-rb25det-toshi-remapped-ecu-r33-stock-radiator-sway-bars/

http://www.skylinesaustralia.com/forums/topic/433062-fs-syd-r33-gts-t-part-brake-pads-subframe-collars-wheels-gauge-holder-misc/

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Hey dude I'll take the handbrake and gear boot if they in decent condition... Can you upload some photos?

OEM handbrake boot - mint, no cracks or poo

Aftermarket handbrake boot & gear boot - good condition, no cracks no anything.. black leather with purple stitching.

$200 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$200 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
$40 2x Falken Azensis RT615 225/35/17 with around 3mm tread

$50 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

$200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$50 RB25DET S2 AFM
$20 RB25DET S2 Stock Blow Off Valve
$20 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$200 RB25DET S2 ABS Diff - minus ABS sensor PENDING
$30 RB25DET S2 Stock Anti Roll bars / Sway Bars
$20 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods

$20 SR20DET S15 Radiator

Hey Johnny, not to shit i your thread but is the clutch plate for the 5-puk carbotic clutch? You said it has .3mm wear on it, what is the measurement when brand new? I emails NPC but they won't tell me, just said send it to them and they will inform me if it needs a rebuild. f**k that. You must know original size if you know it's worn by that much, care to share the love?

Also, FREE BUMP.

Spot on mate, plate came from Doug @ NPC clutch.

Scott @ Western Clutch measured it and told me it is only 0.03mm worn.

I don't have digital vernier calipers to measure the plate but I'll see if I can borrow a set somewhere, measure it and add 0.03mm to it. Not really rocket science :)

$200 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$200 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
$40 2x Falken Azensis RT615 225/35/17 with around 3mm tread

$50 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

$200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$50 RB25DET S2 AFM
$20 RB25DET S2 Stock Blow Off Valve
$20 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
$30 RB25DET S2 Stock Anti Roll bars / Sway Bars
$20 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods

$20 SR20DET S15 Radiator

  • 2 weeks later...

TITS..

$200 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$200 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
$40 2x Falken Azensis RT615 225/35/17 with around 3mm tread

$50 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

$200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$50 RB25DET S2 AFM
$20 RB25DET S2 Stock Blow Off Valve
$20 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
$30 RB25DET S2 Stock Anti Roll bars / Sway Bars
$20 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods

$20 SR20DET S15 Radiator

$200 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$200 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
SOLD $40 2x Falken Azensis RT615 225/35/17 with around 3mm tread

$50 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

$200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$50 RB25DET S2 AFM
$20 RB25DET S2 Stock Blow Off Valve
$20 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
$30 RB25DET S2 Stock Anti Roll bars / Sway Bars
$20 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods

$20 SR20DET S15 Radiator

  • 2 weeks later...

UPDATED PRICE LIST

$150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$180 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

$200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$40 RB25DET S2 AFM
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
$20 RB25DET S2 Stock Anti Roll bars / Sway Bars (front & back)
$20 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods

$10 SR20DET S15 Radiator

UPDATED PRICE LIST

$150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$180 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

$200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
SOLD $40 RB25DET S2 AFM
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
$20 RB25DET S2 Stock Anti Roll bars / Sway Bars (front & back)
$20 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods

$10 SR20DET S15 Radiator

rear sway bar how much comes with braket and links?

give me a 6 pack of white rabbit OR James Squire.. that will do.. comes with links but no brackets as I'm using them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...