Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

UPDATED PRICE LIST

$150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$180 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

$200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
SOLD $40 RB25DET S2 AFM
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor

SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)
$20 RB25DET S2 Stock Anti Roll bars / Sway Bars (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods

$10 SR20DET S15 Radiator

Keep seeing your npc clutch plate for sale, wondering if ill save much getting the plate from you and the rest jew from npc, as ive been wanting to get the npc carbotic 10" clutch to replace my slipping one...

Keep seeing your npc clutch plate for sale, wondering if ill save much getting the plate from you and the rest jew from npc, as ive been wanting to get the npc carbotic 10" clutch to replace my slipping one...

Call up NPC and speak to Doug, OR alternatively, call Scott at Western Clutch at St Mary's and ask if he can sort you out. He uses the same pressure plates as Doug uses in his NPC clutch kits but sets the clamp only at ~1700kgs so the car is more driveable where as Doug goes for the moon.

Scott tested mine and it was over 1900kg of clamping force making the car a bucket of shit to drive and he reconfigured it to around 1700kg.. the car drives like a Yaris now after he curved my new clutch disc.

Il take the rubber intake pipe.. pm me payment details and postage costs.

Cheers

You sure you want it? Postage would be as much as the item lol

UPDATED PRICE LIST

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310
$150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
$200 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$20 RB25DET S2 Stock Anti Roll bars / Sway Bars (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator

SOLD $180 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

UPDATED PRICE LIST

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo
$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310
$150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$20 RB25DET S2 Stock Anti Roll bar / Sway Bar (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator

SOLD $150 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

SOLD $180 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs

  • 2 weeks later...
  • 3 weeks later...

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo

$40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310
$10 Alloy BOV Bung/Plug
$10 110L/h Fuel Pump that fits in stock position
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$20 RB25DET S2 Stock Anti Roll bar / Sway Bar (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator

SOLD $150 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

SOLD $180 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs

SOLD $150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB

  • 2 weeks later...

Yezz.. sold clutch & rear main seal :)

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo

$10 Alloy BOV Bung/Plug

$10 110L/h Fuel Pump that fits in stock position
$20 RB25DET S2 Factory dump pipe & down pipe
$20 RB25DET/RB20DET Factory Manifold
$20 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$20 RB25DET S2 Stock Anti Roll bar / Sway Bar (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator

SOLD $150 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

SOLD $180 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs

SOLD $150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB

SOLD $40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

  • 2 weeks later...
  • 2 weeks later...

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo

$10 Alloy BOV Bung/Plug

$10 110L/h Fuel Pump that fits in stock position
$10 RB25DET S2 Factory dump pipe & down pipe
$10 RB25DET/RB20DET Factory Manifold
$10 RB25DET S2 Stock Blow Off Valve
$10 RB25DET S2 Radiator
$10 RB25DET S2 Fan Clutch
$50 RB25DET S2 Stock SMIC & Pipes
$20 RB25DET S2 Stock Anti Roll bar / Sway Bar (front)
$10 RB25DET S2 Rubber Intake Pipe
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator

SOLD $150 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

SOLD $180 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs

SOLD $150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB

SOLD $40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

  • 2 weeks later...

$40 posted on the oil feed line?

Waiting on one dude to pick it up, if he falls through its yours for 45$ posted :)

$40 BRAND NEW Braided Oil Feed Line for Stock RB25DET Turbo ~ PENDING

Will take everything here for a 6 pack of beer:

$10 Alloy BOV Bung/Plug

$10 RB25DET S2 Fan Clutch
$20 RB25DET S2 Stock Anti Roll bar / Sway Bar (front)
$10 RB25DET S2 handbrake boot & gear boot (1x OEM 1x Aftermarket)
$10 RB25DET S2 HICAS Rack & Tie Rods
$10 SR20DET S15 Radiator


SOLD $150 Yellow Jacket Coil Packs for RB25DET S1.2/2, Stagea Non-Neo RB25DET (7x coils) - happily held 1.2 bar of boost
SOLD 2x Falken Azensis RT615 225/35/17 with around 3mm tread
SOLD $40 RB25DET S2 AFM
SOLD $200 RB25DET S2 ABS Diff - minus ABS sensor
SOLD $20 RB25DET S2 Stock Anti Roll bars / Sway Bars (back)

SOLD $180 RB25DET S2 Turbo - no shaft play, exhaust wheel in one piece & no snapped studs

SOLD $150 NPC 400kW Clutch Plate - Barely Used, worn 0.03mm / Will fit any RB

SOLD $40 BRAND NEW OEM Rear Main Seal & Spigot Bush for RB2xDExx motors - 12279-5L310

SOLD $10 RB25DET S2 Rubber Intake Pipe

SOLD $10 110L/h Fuel Pump that fits in stock position

SOLD $10 RB25DET S2 Factory dump pipe & down pipe
SOLD $10 RB25DET/RB20DET Factory Manifold
SOLD $10 RB25DET S2 Stock Blow Off Valve
SOLD $10 RB25DET S2 Radiator

SOLD $50 RB25DET S2 Stock SMIC & Pipes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
×
×
  • Create New...