Jump to content
SAU Community

Plazmaman Plenum And Top Feed Injectors

Adz2332

By Adz2332,
in Engines & Forced Induction

 Share

Recommended Posts

Adz2332 Grand Master

Adz2332

Posted
Posted (edited)

Hey all

im in the process of ordering parts for my r33 gtst

Will converting the fuel rail to top feed fit with a plazmaman plenum? with say bosch 1200ccs?

I just dont want to order it and find it wont fit with a plazmaman.

Was looking at getting one of their billet top feed rails. Is it an easy change over from side to top?

and im having trouble getting into the web site for plazmaman. anyone else have troubles??

Edited by Adz2332
89CAL Grand Master

89CAL

Posted
Posted

I was on their site last night looking at the top feed rails. Might just be having issues today.

I cant see it being an issue if you have thier Plenum and rail. Surely they were made to work with each other. But best bet to call them anyway

I'm tossing up about changing to top feed injectors because my tuner says he can get my car running alot nicer with ID's instead of the Nismo's I have now. But it runs great now and I'm not going to save a fortune in fuel by changing over so I dont think I'll worry about it at the moment. But interested to see how the plazmaman rail and changing over to top feed injectors goes

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      Rb26 iron block limit

      By r32-25t · Posted

      You don’t need to use full throttle all the time to break these blocks, 500kw at the wheels in more then enough to break them even with an occasional squirt. Hell I’ve seen them break under 400kw
    • Dose Pipe Sutututu
      Question about BoV on RB25DET NEO

      By Dose Pipe Sutututu · Posted

      A work around is to install the R35 card style AFM/MAF on the cold side of the intercooler piping and the BOV on the hot side piping. Works well, also you can combat the revs dropping by adding a bit more ignition timing on the idle ignition timing table to slow the rate of RPM drop.
    • Predator1
      Rb26 iron block limit

      By Predator1 · Posted

      Understood. If you dont have a ridiculous limit,  Tune, T's and P's are in check, and arent bashing it all the time and doing the due deligence for maintenance(inc oil analysis) then its pretty safe. 100% agree, let your right food control it to some extent.
    • Roy
      Rb25/30 Rb30det Vvt Internal Oil Control

      By Roy · Posted

      So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
    • Kapr
      Question about BoV on RB25DET NEO

      By Kapr · Posted

      Yeah i know that MAF is no no for this type of BoV. The engine has no BoV and "hose/pipes" ..it was all deleted (or probably it was not even on the engine when it was bought  ) It does that "sutututu" noise which i kinda do not want(atmospheric is better IMO...but standalone ECU)  What are the cons of running without blow off on stock RB25DET NEO. It running 5-7 PSI max (it has boost controller)   EDIT: and can Nistune be "tuned" to know there is no BoV to i dont know "know" and be better for a car? I read so many info about no BoV. One guy saying it is bad and hurting the turbo/engine/car and other that it does not...  
×
×
  • Create New...