Jump to content
SAU Community

Recommended Posts

Hey guys, I recently replaced my rb20det turbo with a rb25 turbo and dump.

Now that it's all back together it will idle fine from start up untill I drive it down the street and stop. Then it will idle at 800rpm like usual but then drop to about 100rpm and then back up and down.. It some times even stalls.

I need ideas on what it could be! I've tripple checked every thing to see if every thing is back on, no air leaks.

I'd love to get some feed back because I can't get my head around it now!

Link to comment
https://www.sau.com.au/forums/topic/442829-horrible-idle/
Share on other sites

Its just weird though that it was perfectly fine before i took the turbo off to put a 25 turbo on. Now it doesnt like it. At first I just thought that maybe the computer had to relearn itself.

I live on the north side and last week I had Tafe at Archerfield. In the morning I drove to archy and it didnt Idle Funny at all. On the way home it was a diffrent story! It stalled 5 times and idled really badly. Then last night I went up Mt mee and every time i would stop it was idle shit house.

Link to comment
https://www.sau.com.au/forums/topic/442829-horrible-idle/#findComment-7279059
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...