Jump to content
SAU Community

Recommended Posts

Hey Guys,

Recently I started having an issue with my HICAS, every couple of minutes the light would come on the dash(even when stationary) which would be followed by a fluctuation in revs and slight noise from the rear end. Now it has gotten a lot worse, when the HICAS light comes on now its very erratic, stiffens up my steering wheel and slightly jerking it and every now and then shuts down my stereo while the light is on the dash. Last night even switching my headlights on seemed to get a rise out of it. Could this be from a bad earth somewhere that is effecting these systems?

It has an aftermarket stereo and turbo timer fitted but they have been in for over a year now and problem is only around a month old.

I still have standard steering wheel and last mod was long before the issue started.

Link to comment
https://www.sau.com.au/forums/topic/442956-hicas-creating-havok/
Share on other sites

Certainly sounds like a wiring issue. Being that HICAS components exist at the front and rear of the car, its going to be a bit of a pain to diagnose which part is causing it. Seen as its messing with your stereo and headlights I'd start inside the car, may have to pull the dash out and just have a look at all the wiring. Not very helpful but its a bit of a hard one to diagnose without being there

The #1 concern with these old HICAS computers these days will have to be whether the electrolytic capacitors inside them are still OK, or if they are dying and causing all sorts of other shit to fry in there. I'd be having my HICAS controller apart on the bench in seconds if mine started doing this.

How old is the battery?

Haver you checked the tension on the alternator belt? (R32 is notorious for not liking bad voltages).

Battery is only 1 year old still has good charge. I'll check the belt tension out

The #1 concern with these old HICAS computers these days will have to be whether the electrolytic capacitors inside them are still OK, or if they are dying and causing all sorts of other shit to fry in there. I'd be having my HICAS controller apart on the bench in seconds if mine started doing this.

I have had the controller open and everything looked sweet, didnt test the capacitors though.

I plan on getting a lockout kit in a couple of months but if theres an electrical issue somewhere I want to sort that otherwise I'll still be having issues elsewhere. Going to try and clean up current earth's and add another and checkover as much wiring as possible to see if I can find any damage

Edited by Spartan-117

Update,

on the way to auto electrician it died in the arse. 1km away SOB. Melted the fusible link off positive terminal. Definitely something not happy somewhere in the car.

I'll update with an outcome from sparky

The standard connections for the fusible links were the problem all along, seen bottom left in picture. Removed the standard connection and just put ring ends on wires and connected directly to battery.

They werent getting enough power from the standard aged connections so HICAS was first system to get the shits with it.

13917104415 bcf4ba2dfa B

All good now, no more warning lights no more dramas

Because this

What now? HICAS would be the exact opposite of what you want in a car to make that sort of driving enjoyable. The whole time you are flinging it sideways the bloody HICAS would be fighting you for control of the rear end because it has no idea what the hell you're doing.

HICAS is a miserable attempt to make a front heavy RWD chassis feel like it has faster turn in than it natively does. Below 7/10 driving its veneer of snappy turn in is acceptable. Above 7/10 it makes the car feel like it's trying to kill you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 12+ months passed so they have no obligation to do a warranty claim. It leaked from the rear circuit. Front circuit was fine, but I tried many times to bench-bleed and in-car bleed (wasted 1L of Penrite racing brake fluid) to no avail. Threw my old BM50 or whatever the standard R32 GT-R BMC is, brakes went back to normal. So from my very limited anecdotal experience, I cannot recommend HFM, even though a lot of their products looks good. Just my experience (I have a genuine Nissan BM57 in a box waiting to be installed now).
    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
×
×
  • Create New...