Jump to content
SAU Community

Recommended Posts

i recently purchased a 3" hi flow cat + cat back exhaust with a resonator. however, the noise in-cabin is starting to annoy me. does anyone have any ideas how to quieten it down? will sound dampening material in the boot help? will a 3" dump/front pipe make any difference to the exhaust note? thanks :)

Link to comment
https://www.sau.com.au/forums/topic/44478-exhaust-noise-query/
Share on other sites

the Apexi ECV fits up just after the cat, and can be opened or closed as required.

Other than that, I did fit a heap of quilting material bought from spotlight inside my boot behind the trim and under my rear seats, that toned things down a bit and weighs nothing. Only cost about $6/metre.

bah, bit of exhaust noise is what u want! hear ur engine!

but yeh some exhaust designs/mufflers are more prone to "droning" than others when at low speeds. resonators should help with that.

my exhaust is 3" from turbo the muffler straight pipe, then muffler with 5" tip! but its surprisingly quiet below about 3500-4000rpm til it gets properly on boost. guess igot lucky :)

the dump pipe doesnt really make much difference to cruising noise. however, it does make the exhaust system noiser when u start giving it shit/hard acceleration.

(i know this as i had it upgraded on my car from when i first had the car)

  • 6 months later...

dstylez - let us know how you go and how much it costs. I have a 180sx and cabin noise is pretty high (3" CES front/dump + 3" catback/high flow cat), and on long trips I put in the silencer to make it quieter. I am thinking of getting a muffler added before the cannon.

It will make it quiter but it wont stop the droning . To stop that you will have to look at the design of the rear mufler and tip .

hmm thanks for the suggestions, i'm considering getting a centre muffler put in to make it quieter

Sorry to deviate a little. But I have a 3.5" cat back and want to go 3" dump/front (on RB25det in R33), currently standard dump and front. How much difference will this make. I really don't want it any louder!

It currently isnt that noisy - it is a kakimoto cat back...my friends astra turbo with 2.5" cat back is noisier. I dont't really want to have to add anything after I fit the dump to quieten it down.

Thanks

Yeah that might help the original posters Qn.. I think resonators are only about $100 installed or you might want to get a not so straight through rear muffler.

My car already has resonator - but I'd rather not go the dump if another resonator is required...

just wondering whether it will make much difference. I suppose I'm looking for someone who had a relatively quiet 3.5" cat back and then fitted 3" front/dump to see what kind of difference it made.

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...