Jump to content
SAU Community

Recommended Posts

Origiunal Quote from BlackRobin:

(I was looking through import lists for over 7 weeks and probably viewed 60+ R32 GTR's... 5-6 looked really nice)  

I think most GTR's I looked at over the 7 weeks were stock (alot looked shit and run down) some have got way to many mods and roll cages etc... those looked like they would have been thrashed and subjected regular race use (not for me)  

One thing I did notice on 95% of imports in Japan, they all have those stupid cup holders (sorry if anyone has some) I know the first mod I will be doing is getting rid of them from my dash (very RICE)

Origina Quote from Funkymonkey:

mate... take this as a very important word of advice... UNDER NO CIIRCUMSTANCE should you try to remove those cup holders from the centre and passenger side ventilation vents.... why? Because japanese cup holders and R32 vents is a one way thing, once on, never removed. R32 vents have this predisposition to crumbling to dust once you remove em. Trust me, I've seen plenty of R32s go thru J-Spec and most of the ones with cupholders come back in a week and ask for centre vents (mine included)

Hi,

Cup Holders... RICE... I think so. More so the ones that say Type-R (Type-R cup holders..thats an extra 10kw right?)

I have brought these quotes from another thread in the Vic Pages. My forum etiquette is novice, is it OK to to do this?

And, not that I don't beleive Funkymonkey... but there must be a way to get rid of them... they even say HOT/COLD cup holders? I really would like to get rid of them once ar arrives.

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

well esp with cars as old as the R32, the grill is made of brittle plastic, and if you exert even a little force on it you'll snap the whole thing off. For some reasons the 32's I think coz of the material its made of and the sunlight acting on it etc etc, the centre vents are easily snapped, and because of that the prices for that part on average is more than usual in japan.

Stickers add to the performance of the car? How? Stickers are usually very slippery, thus when the air passes the sticker it has less resistance than the surface of the panel.

So in short, stickers reduce the aerodynamic co-efficent of the car.

Example. Look at F1 cars. The cars with most sponsorship stickers are the faster cars. Best example the Ferrari's (also red is faster but that's another essay).

Cars like the Jordan and Minardi are slow because they lack stickers. :uh-huh:

 :bahaha:

It may, and I may also be wrong, but if the car is polished and waxed well enough, it'd give the same effect as several stickers. Plus, it also depends on the 'thickness' of the sticker, and how much this edge faces the airflow.

Anyway, even if you have the parts, there should be a part - sticker balance. Having a HKS intercooler, and then 101 HKS stickers ain't the way to go. Nothing wrong with a few small stickers though; but you still need the parts.

Goon, that's what aftermarket bodykit's are for.

GT-R kit on GTST = rice.

Kind of like those dudes back in the early 80s that would buy a VW beetle and buy a porsche full body kit. :)

But the question on everyones minds is.. is that considered early 80s rice?

i'll throw in my opinion for what it's worth. If you have a Nismo, HKS etc... sticker on your car and you have nothing of those brands on your car it's RICE. RICE is lying about what is on/in your car...

i don't think it's RICE if your simply want your car to look cool... my mate, who drives an FTO, couldn't care less about the performance of the car but still is going to get a body kit on his car and will put the RALLIART sticker on his car it's not really rice if it is a RALLI ART body kit.

but ralliart, as is nismo, the performance sector of the car company. you goto nissan.com you see the link to nismo part. you goto mitsubishi aus site, under sports there ralliart vehicles. this is why i say these 2 examples of stickers (or TRD and whatever other there are... STI ) are not rice as they don't imply a part in the same way apexi and greddy stickers do. i see your point though.

I don't think the GTR kit is rice, but if you put the badges on too that's a different story. Yes I do have a GTR rear spoiler on my car, BUT, it serves a purpose, it is capable of making downforce, unlike the standard R33 spoiler which is just there for looks. Does this make the standard 33 spoiler rice? When I bought my car there were Apexi stickers everywhere. I managed to get most of them off but am now left with a hideous sticky residue on 1/2 my dash. However the car did come with Apexi suspension, strut brace, intake, gauges etc.

Does this make the standard 33 spoiler rice?
How can a standard part be rice? (even if it's functional or not?) Are you gonna go into a dealer and say "Y'know dude, I think I'll pass on the Evo 8, coz it's got too much rice from factory..."

This whole rice thing is getting irritating.

my skyline came with some "skyline" stickers on the passenger side of the dash, the ashtray and centre console. that is ricey. they were removed the day i saw my car at the importers.

stickers like that are very unesscessary and unsightly that is why they are ricey, there is no value. i feel the same way about stickers on paintwork of any type be it characters, to stickers of performance brands, whether you have the parts or not on or in the car it is ricey.

why ruin the the body lines of a car by putting stickers on them?? like someone said earlier that is what your tool chest or toolboxes are for.

i am sure i will upset some fellow skyline drivers by my comments but i find it really dissapointing when i see a line with stickers all over it.

my friends tell me my car is "ricey" but they have no idea really, they think as the car is from japan that it is "ricey" this is why i am so vocal on the matter as i try to explain to them the differences between something from japan with a stock bodykit (except my front bar) and an over the top body kit on a car (usually an excel or corolla) with ridiculous wings and sheet metal hanging off it and say that is ricey.

any crap you can buy from supercheap etc. is most likely to have a high "rice" factor. checker plate inside the cabin is ricey too.

paint work is something differentpaint a car whatever colour you want. it has to have paint so it can't be considered ricey to have bright or offensive paintwork.

i have gone on too long here, sorry but i don't understand why you would want stickers on your car.

i saw a 1988 ford with printed out performance stickers glued to the side of the car, and also had some word printed out on paper and glued to the car window. It also had two NOS stickers on the back of the car....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...