Jump to content
SAU Community

Recommended Posts

Guys i need some feedback from professionals such as yourselves.

My R32 GTS4 is running a HKS 2530.

Bigger injectors and fuel pump.

Apexi front mount.

I've got a super strong clutch.

Old style Apexi AVCR.

Only running 10psi.

The other day i was driving like normal, seriously, and the tachometre needle just jumped over 8 thousand revs as if i had clutched in, but i haden't. I pulled over and checked what i could but there was nothing visibly wrong. i started the car again and it drove fine. it's as if the engine is boosting like a million pounds without fuel. I checked the wastegate actuator line, no problem and all hoses are fine, clutch engages all gears fine, no diff noise, no gearbox noise, just this scary overboosting (imo).

If anyone knows what i mean please help a brother out!

Peace.

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/
Share on other sites

thanks guys. yes the car does move while the problem is occuring but feels VERY slow, as if there is NO boost at all. as for clutch slippage there has been no such action, fresh clutch very strong. I was thinking about the boost controller solenoid but i don't know how to fix one if possible. thanks again for your valuable input.

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-909985
Share on other sites

sounds like a slipping clutch to me. how long ago did you change it? with a stock one or aftermarket one?

if it were the boost solenoid going then that doesn't explain why it revved to 8000rpm suddenly it would only explain the loss of power.

maybe a problem with the diff? sounds something drivetrain-related as if the engine lost load and just revved freely...

let us know how you go,

Waz.

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911236
Share on other sites

thank you ed and waz. these things sound scary to a novice like me and i'm not so sure i know how to acurately check these things. the clutch is probably a year old and feels really grippy and always did before the problem started, it's a heavy duty item. the problem happens all the time now. any ideas how to check gearbox and diff?

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911312
Share on other sites

Does it happen when you accelerate? or just after you change gears? turn corners? etc etc

Does it happen when you are doing a certain speed or rev??

Or does it just happen any time on a straight bit of road at normal speed [and you may have been sitting on the same speed for a while?

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911371
Share on other sites

ooh so many questions. okay, car starts, clutch fine into gear, accelerate fine up to 1500rpm and then it's as if i've clutched in and the pressure of my foot on the gas pedal sends the revs flying. happens through corners and start stop etc. kind of goes away after a good warm up, say 15 mins. after this happened a few times i didn't want to damage the car further so i haven't taken it anywhere yet.

Thanks trident.

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911424
Share on other sites

When the engine revs increase, are you braking out into wild wheelspin? It is physically impossible for your revs to increase so dramatically without your roadspeed inceassing also.

So you are either braking into pretty wild wheelspin (i think you would have noticed that by now :) ) or you have a drivetrain problem, im assuming your clutch. :Oops:

You say it happens in 1st gear, does it happen in say 3rd gear going up a hill?

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911778
Share on other sites

thanks roy. yeah no wheelspin, and it does happen in any gear. as for my clutch it was working fine for a year and then one night while in 5th gear on a freeway it just revved up. the clutch engages all gears easily so if anyone could tell me how to check my clutch i would greatly appreciate it.

Link to comment
https://www.sau.com.au/forums/topic/44511-big-problem/#findComment-911878
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...