Jump to content
SAU Community

R32 Gts-T Interior Items Plus Aftermarket Items


Recommended Posts

All items are no longer needed or incorrect for my car see more details below. All prices negotiable, need the space in the garage again. If they don’t sell they will be in the bin, so make an offer. Ive guessed the prices so some may be way off.

All items are located in NSW, Sydney. Near Liverpool. Will post, however postage will be extra and if a courier is needed the buyer is to organize. Wont send them until the cash is in my account, and will be still on the market until cash is in my account.

Can get in contact with me by calling 0421 845 346 or PM

20140705_150715.jpg

20140705_150724.jpg

20140705_150733.jpg

Blitz return flow intercooler, has been used for street work before I bought the car. In good condition.

600 x 270 x 70 core and 740mm from end to end. 2.5 inch outlets

$200

20140705_150830.jpg

R32 GTS-T rear seat, car has 118 000kms on it. The seat looks near unused! Sun fading on the top, mark on the top right too might clean out.

$50

20140705_151237.jpg

20140705_151306.jpg

20140705_151252.jpg

GTR drivers seat, think its an R32 as it has come out of my R32. Rip in bolster and rub from the seat belt. Including seat base however you will need to re-use your seat belt buckle.

$150

20140705_151705.jpg

20140705_151710.jpg

R32 carpet. In good condition as you can see the pics, small amount of wear but not much. Has been cut to allow installation without removing the console, cant tell when installed

$100

20140705_151856.jpg

20140530_144220.jpg

20140530_144214.jpg

Boot lining, including carpet, sides and rear. In good condition however the carpet has seen better days

$80 for the lot

20140705_152248.jpg

Spare wheel, spare wheel cover and jack. Will sell separate

$100 for the lot

20140705_152324.jpg

R32 Kick panels, drivers and passenger side

$20 each

20140705_152344.jpg

R32 Centre console, good condition, some marks however. As before car has 118 00kms

$80

20140705_152554.jpg

RB25 DET standard manifold, unsure of KMS as the engine change on my car wasn’t done by me. Includes what is seen in the picture, might be missing items

$20

20140705_152807.jpg

R32 rear seat belts, includes what can be seen in the pic. I believe they are complete including bolts

$100

20140705_152918.jpg

Standard RB25 DET oil cooler

$40

20140705_152935.jpg

Remote filter adapter, no stud just what you can see

$40

20140705_153008.jpg

20140705_153020.jpg

Fuel rail for RB25DET, to suit top flow injectors. Includes mounting kit, may be missing a washer or two. Brand new never fitted, has some small shipping and garage living marks

$50

20140705_153128.jpg

JVC head unit, not sure what brand. Can get more info if someone is really interested. Cant guarantee it works as when I picked up the car it wasn’t (believe its just a fuse on the car that stopped it working but cant confirm that. If you know how to test it before you take it away no problems at all)

$50

20140705_153155.jpg

20140705_153209.jpg

90mm throttle body for RB25 DET, brand new never fitted. Too big for what I need.

$80

20140705_153235.jpg

Rear parcel shelf for R32 GTS-T. Wood backing isn’t broken, could do with a clean. Good condition however

$40

20140705_153241.jpg

Rear interior cards, good condition however one is missing the fabric

$40 for both

20140705_153250.jpg

Rear C pillar trim and heater separator. The pillar trims are broken in the corners but good enough for a road worthy!

$20 for heater separator and $20 for trim

20140705_153358.jpg

R32 GTS-T hicas. Was unplumbed when I removed it so unsure if it works. Comes with two tie rods. Good enough condition

$50

20140705_153509.jpg

Clear indicators, GTR or GTS-T not sure they were in the glovebox! Also not sure if they work as they wernt connected to the car.

$50

Link to comment
Share on other sites

Think the last lights are not actually indicators, believe them to be licence plate lights.

Parcel shelf sold, well the speaker covers anyway. The buyer doesnt need the parcel shelf so if anyone if after the shelf minus the speaker covers let me know. (This was cleared with the buyer as it will be cheaper on freight!!) If not, in the bin it will go!

Link to comment
Share on other sites

Intercooler sold.

Parcel shelf and speaker covers back on the market. When i pulled the speaker covers off to shop as per the buyers request, two plastic tabs broke so he no longer wanted them. Other than that, no dramas with them.

Still negotiable on all the gear, get in before it goes in the bin.

Link to comment
Share on other sites

Thanks mate, nice and easy way to do business.

All right, buy my stuff!!

Rear seat

$20

Carpet

$75

Boot lining

$50

Spare wheel items

$50

Centre console

$50

Manifold

$Free

Seat belts

$50

Standard oil cooler

$20

Fuel rail

$50 still

Throttle body

$50

Door cards

$Free

Buy my stuff!

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • no probs I got 1 maybe 2 coming with me atm ...   yeop hopefully advance in times and all that - fingers crossed - just looking to push and get better - tis all we can do its have a go right
    • Came across these Ganador reps and am wondering if anyone has used these/come across these ?  Seem to look like reasonably good replicas (shape wise) from what I can see. Ive been told by them that they are moulded to be exact copies of original Ganadors (but thats what every replica version will say) https://www.shiftperformance.com.au/ganador-style-mirrors-suits-nissan-skyline-r33-gtr Photos of them installed appreciated Thanks 👍
    • lol, yeah, and how gutted I am now I’m back over in Europe (actual Europe) and dealing with the nightmare of U.K.-Continental Europe bureaucracy.   Anyway, arrived in NL early January with the BMW, whilst the Skyline followed suit about a week later. Both cars ended up stuck with their relative importers for about six weeks. Since then, I made a trip to the Nurburgring with a friend and have since ditched the Skyline in the garage. This week, I finally managed to find a suitable shop to do an alignment so hopped on over to Germany to fix the miserable mess the local Netherlands shop conducted; the car was just not aggressive enough in the rear for my driving style - I found myself understeering a fair bit at the ring which was really a first for me with this car. Mis-matched F&R tyres can be held partly responsible - have now moved to F+R NS2Rs. One thing I’ve noticed is the 180kph limiter just does not cut it here. I quickly hit that (for the first time) in Germany on the autobahn. Japanese circuits are small - at least the ones that were near me. I rarely spent much time in 4th. After much deliberation with the HKS SLD, I have ordered Nistune from Matt. Whilst the Skyline has been gathering dust I got to learning the highly neglected BMW I bought in the U.K. was in fact just that, highly neglected. Took the ol’ dog down to Switzerland last weekend with a progressively deteriorating front end. It went from vibration during braking at highway speed on the way down, to vibrating non-stop on the way back. I’ve already fixed numerous engine issues - low oil pressure, f**ked injectors, incorrect coils and plugs, electric water pump. Still to do is a suspension and brake overhaul, rear subframe replacement and likely more ageing engine electrical components. But I must say, I love it. After so long with the Skyline, I really didn’t know cars could be so comfortable.    
    • Thanks. I adjusted my soft cut to 7600rpm and if I see I'm still making power there, I'll consider readjusting to possibly 7800rpm while on the dyno. 
    • Yeah not sure. I sourced another relay no problem, its definitely a relay according to Nissan parts, they used those specific relays on a bunch if cars around that time, but my two options are, find a behind dash wiring loom which is proving difficult, or get the current loom fixed up by the shop when they put my rebuilt engine back in, they are confident in their auto electrical abilities. Thing is my current loom has anti-theft stuff and GPS immobilisers wired into it so easiest option may be to just fix the current one to save ripping apart the immobiliser. 
×
×
  • Create New...