Jump to content
SAU Community

Recommended Posts

All items are no longer needed or incorrect for my car see more details below. All prices negotiable, need the space in the garage again. If they don’t sell they will be in the bin, so make an offer. Ive guessed the prices so some may be way off.

All items are located in NSW, Sydney. Near Liverpool. Will post, however postage will be extra and if a courier is needed the buyer is to organize. Wont send them until the cash is in my account, and will be still on the market until cash is in my account.

Can get in contact with me by calling 0421 845 346 or PM

20140705_150715.jpg

20140705_150724.jpg

20140705_150733.jpg

Blitz return flow intercooler, has been used for street work before I bought the car. In good condition.

600 x 270 x 70 core and 740mm from end to end. 2.5 inch outlets

$200

20140705_150830.jpg

R32 GTS-T rear seat, car has 118 000kms on it. The seat looks near unused! Sun fading on the top, mark on the top right too might clean out.

$50

20140705_151237.jpg

20140705_151306.jpg

20140705_151252.jpg

GTR drivers seat, think its an R32 as it has come out of my R32. Rip in bolster and rub from the seat belt. Including seat base however you will need to re-use your seat belt buckle.

$150

20140705_151705.jpg

20140705_151710.jpg

R32 carpet. In good condition as you can see the pics, small amount of wear but not much. Has been cut to allow installation without removing the console, cant tell when installed

$100

20140705_151856.jpg

20140530_144220.jpg

20140530_144214.jpg

Boot lining, including carpet, sides and rear. In good condition however the carpet has seen better days

$80 for the lot

20140705_152248.jpg

Spare wheel, spare wheel cover and jack. Will sell separate

$100 for the lot

20140705_152324.jpg

R32 Kick panels, drivers and passenger side

$20 each

20140705_152344.jpg

R32 Centre console, good condition, some marks however. As before car has 118 00kms

$80

20140705_152554.jpg

RB25 DET standard manifold, unsure of KMS as the engine change on my car wasn’t done by me. Includes what is seen in the picture, might be missing items

$20

20140705_152807.jpg

R32 rear seat belts, includes what can be seen in the pic. I believe they are complete including bolts

$100

20140705_152918.jpg

Standard RB25 DET oil cooler

$40

20140705_152935.jpg

Remote filter adapter, no stud just what you can see

$40

20140705_153008.jpg

20140705_153020.jpg

Fuel rail for RB25DET, to suit top flow injectors. Includes mounting kit, may be missing a washer or two. Brand new never fitted, has some small shipping and garage living marks

$50

20140705_153128.jpg

JVC head unit, not sure what brand. Can get more info if someone is really interested. Cant guarantee it works as when I picked up the car it wasn’t (believe its just a fuse on the car that stopped it working but cant confirm that. If you know how to test it before you take it away no problems at all)

$50

20140705_153155.jpg

20140705_153209.jpg

90mm throttle body for RB25 DET, brand new never fitted. Too big for what I need.

$80

20140705_153235.jpg

Rear parcel shelf for R32 GTS-T. Wood backing isn’t broken, could do with a clean. Good condition however

$40

20140705_153241.jpg

Rear interior cards, good condition however one is missing the fabric

$40 for both

20140705_153250.jpg

Rear C pillar trim and heater separator. The pillar trims are broken in the corners but good enough for a road worthy!

$20 for heater separator and $20 for trim

20140705_153358.jpg

R32 GTS-T hicas. Was unplumbed when I removed it so unsure if it works. Comes with two tie rods. Good enough condition

$50

20140705_153509.jpg

Clear indicators, GTR or GTS-T not sure they were in the glovebox! Also not sure if they work as they wernt connected to the car.

$50

If you have a steering wheel then I'm keen for a PM :)

Will grab the active speaker covers and parcel shelf. PM incoming :)

Edited by Sinista32

Think the last lights are not actually indicators, believe them to be licence plate lights.

Parcel shelf sold, well the speaker covers anyway. The buyer doesnt need the parcel shelf so if anyone if after the shelf minus the speaker covers let me know. (This was cleared with the buyer as it will be cheaper on freight!!) If not, in the bin it will go!

Interested in gearshift surround if all tabs are in good condition. PM if it's for sale.

In case you don't know what I'm talking about; I've attached a pic for reference.

post-28600-1259841736.jpg

Intercooler sold.

Parcel shelf and speaker covers back on the market. When i pulled the speaker covers off to shop as per the buyers request, two plastic tabs broke so he no longer wanted them. Other than that, no dramas with them.

Still negotiable on all the gear, get in before it goes in the bin.

Thanks mate, nice and easy way to do business.

All right, buy my stuff!!

Rear seat

$20

Carpet

$75

Boot lining

$50

Spare wheel items

$50

Centre console

$50

Manifold

$Free

Seat belts

$50

Standard oil cooler

$20

Fuel rail

$50 still

Throttle body

$50

Door cards

$Free

Buy my stuff!

I realise the manifold is free and you just wanna get rid of it with the minimum of fuss but are you willing to post it and if so how much to NSW 2539?

already have a guy thats keen on the manifold if i want to post it but still free to pick up!!

its the intake manifold

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...