Jump to content
SAU Community

Power Loss On Downshifts, Bouncing Idle And Slight Hesitation At Specific Rev Point -R34Gtt


Recommended Posts

Sorry my bad. I assumed that going a 3L you would upgrade the supporting mods, water and oil pump, timing belt, clutch and at least a dyno tune. Obviously not the case, I apologise.

You can't do it without a timing belt. Water pumps are cheap as. The rb30 oil pump is fine. Shim the relief valve for free.

And I tuned it on the dyno.

Widebands are the best.

I also thought my car was running rich.

Bought wideband.

Observed AFR.

Changed fuel maps to suit.

Car running correctly.

See also:

Got tune. Cold start was terrible. Idle was terrible (17:1).

Made 30 seconds of changes.

Car running correctly.

See also:

Car tuned on E85. Corrections for 98 not entirely right (known).

Get E58 or something in tank after tank swap.

Made 15 seconds of changes in correction map.

Car running correctly.

See also:

Changed injectors from 1000cc to 1400cc.

Car not running correctly.

Made 2 minutes of changes to fuel map.

Car running correctly.

GET A WIDEBAND

  • Like 2

Doing a RB25/30 conversion for less then $3k can be done IF you can do all of the work yourself and all good and well these guys say you can cause i did it is not a fair statement, you couldn't take you car to someone ( and not a mate ) and get it done for that, no way in hell

It also come to what supporting mods you do and to what level and how properly you do the conversion as we all know there are cheap way to do some stuff which isn't exactly the best way of doing it

So the real question would be can Ron do it for less then $3k done and dusted ?

  • Like 2

Again with the wide band, if tuned properly you shouldn't need one, nice to have but not needed cause really you can only do so much on the street before it should be put on a dyno and tuned properly

^^ This really clever fellow here knows me more than I know myself !!

Yes.

It's based on many things you have posted.

For example.

You specified how exactly you were going to block up your bov return. And did it weirdly anyway.

Someone who knows what they are doing just does stuff.

I do really hope you can get the car sorted out.

22 pages on AFM vs. BOV lol

I reckon, sell Power FC, BOV, AFM - buy Adaptronics, block up BOV port/return dose & bake tyres all day

  • Like 1

So in in Rons case it would go

Nistune, sell

Power fc sell

Adaptronic

???

Profit?

Edited by Ben C34

flutters is the shit man... you won't look back.. and no more reversion, no more stalling crap, no more dirty AFM, etc.

rip skids & be happy

  • Like 1

Again with the wide band, if tuned properly you shouldn't need one, nice to have but not needed cause really you can only do so much on the street before it should be put on a dyno and tuned properly

True enough for anything over 100kmh with a power run. The 97% of the driving you use a street car for however can be done with a wideband and some tinkering. The power runs is what the dyno is for but that is really only a small fraction of the time (money!) it takes for a tuner to tune the car, but I agree - it's no dyno replacement.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'd be worried about having to parallel park a boat like that. Magnificent car though.
    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
×
×
  • Create New...