Jump to content
SAU Community

Recommended Posts

Hey guys,

I hit up streettotrack.com about BC BR coilovers (for r34 gtt) but they no longer stock them and have recommended the HSD DT coilovers.

Can someone shed some light on these, preferrably those who are using/have used them, as I'm not too familiar with them.

Are they good for street/track use and are they equivalent to the BC BR's?

Edited by suwidji
Link to comment
https://www.sau.com.au/forums/topic/446375-hsd-coilovers-help/
Share on other sites

ive got a set for my 180sx with an rb25 yet dont know how they go as yet to install, yet the dualtech series are a twin tube shock istead on monotube, ment to be a less harsh ride on the road, yet less suited for track use. hsd also do a more expensive monotube shock (the dts retail around the 1k mark, or for about 1.3k the monotube hsd) you can also get them from wholesale suspention, who would be happy to talk to you about the differences.

Had some adjustable HSDs on S13 Silvia a few years back. Can be harsh (as in stiff) on road but I found them to be quite good. HSD is a relatively well known brand in the field. I think HSD equivalent to whatever BC set you were going to by will be just as good if not better.

My 2c

Cheers

Amir

Had some adjustable HSDs on S13 Silvia a few years back. Can be harsh (as in stiff) on road but I found them to be quite good. HSD is a relatively well known brand in the field. I think HSD equivalent to whatever BC set you were going to by will be just as good if not better.

My 2c

Cheers

Amir

The DT (as above, twin tube) should be less harsh than the monotube dampers, from my experience the monotubes are quite harshly valved and perform much better on the track than street.

  • 2 weeks later...

ISC coilovers are a good bang for buck set. you can also choose your own spring rates when ordering. i have 8/6kg springs in the r33 and its a pretty sweet ride considering how the car goes full noise on the race track, street driving isnt harsh at all

ISC coilovers are a good bang for buck set. you can also choose your own spring rates when ordering. i have 8/6kg springs in the r33 and its a pretty sweet ride considering how the car goes full noise on the race track, street driving isnt harsh at all

Im glad yo said that mate. Im in the process of setting my car up for track. Currently has JIC coilovers on it but might upgrade later on and get some with camber adjustment etc. So 8kg front and 6kg rear?

Cheers

yeah mate, thats a drift kind of setup with those spring rates, but its a good combo if you have a street car that likes to go sideways from time to time... a full on circuit car would have heavier spring rates but then it becomes too much on the street if you like to live a life of luxury

yeah mate, thats a drift kind of setup with those spring rates, but its a good combo if you have a street car that likes to go sideways from time to time... a full on circuit car would have heavier spring rates but then it becomes too much on the street if you like to live a life of luxury

What spring rate do you think would be good for circuit car? Not too fussed if its bumpy or stiff on the road as I dont plan to drive it on the road too often; its mainly going to be for track

Cheers

Amir

You can change the spring rate on all coilovers.
Especially easy on the generic models such as HSD, BC etc

If you buy HSD from the Aus distributor you can choose your spring rates, I'm sure it would be the same for BC

Otherwise springs are generally $100/pair up to ~12kg or so, then a little more expensive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
×
×
  • Create New...