Jump to content
SAU Community

Recommended Posts

Hey guys, just notice spool imports sells spline driven billet oil pump gears to suit rb oil pumps.

http://www.spoolimports.com/billet-oil-pump-gears/nissan-rb/rb-spline-driven-billet-oil-pump-gears

Had a bit of a search but could find any account of anyone have installed or used them yet. Just looking to see what everyones opinion is on this option? In theory should be much more robust that the std 2 flat type drive I would think, however would there be any alignment issues or other issues that anyone has experienced or can think of?

Looking at possibly going down this route for a current rb30/25 build but would apreciate any advice anyone can offer.

Link to comment
https://www.sau.com.au/forums/topic/446380-spline-driven-oil-pump-gears/
Share on other sites

I don't know why this wasn't done much sooner.

Company called supertec in UK/Europe also make them to suit different pumps.

Nitto is also coming out with a drive spline soon (they have been been doing R&D for a couple of years).

Did find that when searching but was a bit concerning that nitto has been doing r&d for so long and not yet released it yet. Makes me wonder if there is an underlying issue I have not considered?

Only thing I can think of is that it would require more accuracy for alignment/height of crank snout to oil pump drive centre. Would be less forgiving if it had to line up all splines?

If anyone has fitted a set with no issues would go a long way in making me feel more confident in going this option

I think I recall NITTO posting on here to the effect that the installed height of the crankshaft in the block is the issue. If you machine the main tunnels the crank can/will move up and down a tiny bit relative to the block. The oil pump doesn't. The flat drive arrangement allows some slack that lets this happen without problem. But the splines don't have that freedom.

Or something to that effect. Do a search - I'm sure there's something on here from NITTO about it.

Yeah seen that and thats what raises the question of issues with trying to install these spool gears. Would that be the only issue? So if im planning on using std main bolts and hence no line boring or altering of crank hieght (in theory anyway) should be all good?

In theory, communisim works.......

I dunno, I got alot of gear from Spool, and don't have any problems with the stuff. The rods look/are great and the rest of the stuff has been good. But I'd be more inclined to listen to pay attention to what the guys at Nitto are doing. With any luck spool have been doing the same research in the background, but I wouldnt want to be the guinea pig without any knowledge.

If it were me, I would call or email Spool and see if they have done some R&D into the potential issues with boring the crank tunnel etc. It's a good idea, Kinda wish I could have done this on mine, but then again I had to get the crank tunnel machined on mine so maybe not such a bad thing they werent around lol

As with any product R&D is the key to over come any initial design issues and potential problems. These gears we have supplied be it N1, OEM, etc have been tested in high powered street and track to ensure that they work as intended further more Tomei and Jun version have been used in 1000-1200bhp power RB26/30 engines where they are also hammering the limiter and revving up to 11k rpm.

The key to having a reliable setup is prior machining work to ensure that the collar is pressed on with the clearances provided and the correct temp requirements are met.

With our design there is ample clearance in the spline engagement to allow for any out of centre crank alignment with in the manufacturers recommended tolerance. Always best to get the main ends line bored if for what ever reason crank is not a lining up straight.

More pictures facebook.com/supertecracing

Edited by Supertec
  • Like 1

The issue with clearance is not exclusive to only Nissan OEM or N1, but the issue is some what masked with Tomei and Jun as they are thicker gears, but again using flat drive they are not immune from breaking the inner gear. One of our customers broke a Tomei inner gear. We have since supplied him a Tomei spine conversion kit.

  • 3 months later...

The issue with clearance is not exclusive to only Nissan OEM or N1, but the issue is some what masked with Tomei and Jun as they are thicker gears, but again using flat drive they are not immune from breaking the inner gear. One of our customers broke a Tomei inner gear. We have since supplied him a Tomei spine conversion kit.

What are these spline conversion kits worth?

  • 3 months later...
  • 11 months later...
  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...