Jump to content
SAU Community

Recommended Posts

Hi Guys,

I recently moved from SA and I need to find a tuner that is trustworthy and in particular; knowledgeable with Nistune (RB20 ECU running a RB25DET, EPROM program/new features etc.) E85 etc.

I live in Springfield and work near Beenleigh. Willing to travel to get the best result.

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/446499-best-nistunee85-tuner-in-seq/
Share on other sites

I currently am running 100% E85. But I'm thinking it would be more convenient to go flex in the near future. The United Race Blend E85 is another curveball (which will depend on price and them not running out all the time).

My car has been tuned without VCT. So the first thing I need is a tuner to tweak the tune with VCT on and then I can set the window switch at the optimal cross over. It's so doughy down low as you can imagine.

To compound matters my exhaust manifold is slightly cracked. So I’ll probably get a 6boost (high mount) so new pipe work and maybe turbo? Waste gate? The list goes on and never stops ;)

Got my R32 gtr with nistune done on E85 at EFI, they seem to have done a great job and the car runs well. So plus 1 for EFI I guess.

The 107 octane race fuel variant from united seems interesting, though I don't think i'd go for it as it'd limit the areas you could refuel way to much for a street car I think. Also because i'm getting valve float and I wouldn't really gain much more top end with it.

That being said, would be great for more dedicated track cars, or in a flex setup if you were content to spend a lot of your time on 98.

What switch do you have for VCT with RB20 ECU? Something external or a tweak?

If you want a good starting point then turn VCT on at 1200rpm and off at 4800rpm. It might not be perfect but will be much better than what you have and probably a bees dick off optimal.

  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...