Jump to content
SAU Community

Recommended Posts

Hey guys ive fitted a rb25det from a series 1.5 r33 into my r34 gtt and now its time for wiring it in.

I pulled out the whole r33 loom including the engine bay fusebox UNCUT So I can use what I need from it.

The engine bay still has the r34 loom in it but nothing is plugged into the motor.

So the motor was running in my old r33 With a haltech platinum pro plugin so I would need to integrate the passenger side of the r33 loom into the r34 loom to keep the ecu plug.

Does anyone know a decent auto electrician that knows these cars and is reasonable with their price to do this job? And anyone know a rough estimate of the amount of work required?

Cheeeeeeeeeerss guys

Link to comment
https://www.sau.com.au/forums/topic/446777-electrician-familiar-with-skylines/
Share on other sites

What you have done can never be legal, but you obviously know that.

While it can possibly be done, it sounds like a real nightmare of wiring. Not sure I would like to attempt it myself, and I have wired in countless ecu's.

You are looking for an Auto elec, an electrician will only want to fit power points in your house.

I was going to jokingly refer scotty nm35 as above, as I am sure he is very much over currently wiring approximately everything in my car.

Putting a R33 RB25 into a R34 is just like argh man, why!

I would wager it would be simpler to pay someone to remove the R33 RB25 and put a R34 RB25DET Neo in there, vs trying to find someone to get all that wiring to work.

I would wager it would be simpler to pay someone to remove the R33 RB25 and put a R34 RB25DET Neo in there, vs trying to find someone to get all that wiring to work.

100% this... but I'm willing to bet that the internals of this R33 engine are completely worked to the max...

If it's only had minor work though, ditch the R33 engine, swap fruit onto a new neo engine and install that, you don't want to deal with all the hassles.

100% this... but I'm willing to bet that the internals of this R33 engine are completely worked to the max...

If it's only had minor work though, ditch the R33 engine, swap fruit onto a new neo engine and install that, you don't want to deal with all the hassles.

You got that right, its pretty much brand new forged and cammed motor with a Haltech tuned for it. Swapping the bolt ons and finding a new r34 ecu and tuning it oppose to some wiring would be stupid.

The 33 it came out of was defected with emissions so now I'm planing to make all the piping stealth.

My understanding is i need to keep the r34 engine bay fusebox and integrate the r33 engine loom to the fuse box and sort out a couple of interior plugs near the ecu. AMIRIGHT?

Getting defected was the stupid part, changing the whole loom over is just madness.

As you are putting an older engine in there than what it came with, you are just setting yourself up for another defect. AMIRIGHT?

Yep, one that needs an engineering cert to clear, to boot.

Put it in a 33 or a 32 lol.

It would have been considerably easy to just stockify the R33 it came out vs pulling the engine out and putting it into another car.

Or just nistune/highflow its stock officeeeeerrrrrrrrrrrrrrr

It's still illegal, as already stated.

You can't put an older series motor into a newer model and be legal.

No engineer will legally sign off on it anyway as per the above. And if you lie to them, and somehow get it, the cert can be nullified.

You can only go forward with technology, not backwards, due to emissions etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...