Jump to content
SAU Community

Recommended Posts

Doh - sortof, what kind of lift? I'd say they are probably a better match for the turbo and the rpm you sound like you will be spinning to... 272s would be what I'd be going for if I were running a Super94 RB30 :) I forget, are you going to push a bit of boost through it?

I am not sure you will be missing anything positive by having the 272s, aside from an angrier idle maybe! :D

Not sure on the lift will get back to you on that, I had 268/272 jun cams with 9.75 lift but took them out, will be pushing 30psi through it after its been run in and I have a gearbox to handle it :)

  • Like 1
  • 2 weeks later...
  • 3 weeks later...

Ok so the motor is finally getting shipped to me, anyone thinking of getting lewis engines to build you a motor all I will say here is pay a little more and go rips. Pm me for details. Anyway it should be here within a week and I just received my aftermarket Industries 5ltr surge tank with dual walbro 460 pumps and nitto gasket kit. The surge tank is apparently one of the first batch made and has taken a couple months of waiting and waiting. I was hoping this build would have been a lot quicker but I guess these things take time.

post-7636-0-25857200-1412731337_thumb.jpg

post-7636-0-85291500-1412731351_thumb.jpg

  • Like 1

A few people keep asking how the car is coming along so i thought i might do a build thread on it. I bought the 32 late 2012 as a half finished project, it originaly was a 1989 gts4 but had a forged rb26 thrown in it and made rwd only. When i first got the car it needed a few things done as it was sitting around for a couple of years and the whole inside of the fuel tank had rusted and needed a good clean/flush out, new fuel pumps. I had it tuned at Next up performance in brissy and it made 460rwhp on 18pound. That sort of power was pretty fun and wasnt too laggy with a gt3582.

attachicon.gifIMG_0294.JPG

attachicon.gifIMG_0773.JPG

attachicon.gifIMG_0728.JPG

attachicon.gifFirst tune.jpg

This arrangment lasted for nearly a year then i spun a bearing when i was taking my missus for her first drive so i had to scare her, the oil pump didnt fail but it either didnt supply enough oil or the custom sump which was made for it wasnt designed to well. From there ive had the motor taken out and decided to go a 3ltr. I spoke to rips and Lewis engines in regards to a 3ltr and Rob from rips said it would be a 2-3 month wait for a motor and after speaking to Darren i decided to go with his torque monster bottom end and his ultimate 26 head. Its still yet to be finished but with 280 deg cams, 12mm lift and the rest in there she should make some decent power.

attachicon.gif20140528_104403.jpg

attachicon.gif20140528_114742.jpg

attachicon.gif20140528_114919.jpg

attachicon.gif20140528_114942.jpg

My turbo choice was made from watching 34GeeTeeTee's results and listening to what Lithium had to say about the forced performance range of turbo's and wanting to try somthing different that hasnt been done, well not that i have seen on a 26/30. I was looking at the HTA3794 but they had the super 94 on sale which is "like a 3794 hit the gym" as fp say on there website. I also bought a 60mm turbosmart powergate as i previously had a 48mm progate and couldnt fault it. Last for the hotside i bought another 6Boost manifold to suit the 26/30 with t4 divided flange and 60mm gate And will be going full 4" exhaust when its put back together.

attachicon.gif20140625_112010.jpg

attachicon.gif20140625_112310.jpg

attachicon.gif20140624_181152.jpg

From there ive bought some other bits a pieces, I bought a N1 bar with the lip from nissan for just over $700 delivered and I was chasing a set of 33 gtr wheels and i was quoted from Nissan $1700 plus gst each (lol) so I got a second hand set of wheels and had them painted and machined up at magit wheels on the gold coast, they turned out unreal and wrapped them in achilles 123's. Then i purchased some r34 gtt calipers and had them painted red and fitted with ebc pads, dba slotted rotors and HEL braided brake lines. See how these work otherwise some AP's or brembo's will be on the list.

attachicon.gifIMG_1058.JPG

attachicon.gifIMG_1288.JPG

I just recieved this plenum from rips and the quality of their work is unreal, so nice just to look at. Few other things i have is HEL braided abs delete kit and clutch line, Koyo 53mm type r radiator to keep it cool. Ive ordered a 5ltr surge tank from Aftermarket Industries running two walbro 460 pumps and a walbro 255 pickup but they said thats still a couple of weeks away. There will always be more but thats all i can think of for now.

attachicon.gif20140818_164445.jpg

attachicon.gif20140818_163903.jpg

Lol i am a bit slow to come to the party... But AWESOME :woot:

Cheers guys, heres some more parts I got sitting around waiting and I just ordered a 4" cat and 4.5" muffler, was going to have 4" straight through but thought I should try and be a little bit responsible. 60mm gate should sound nuts though

post-7636-0-95325300-1412829620_thumb.jpg

post-7636-0-82821800-1412829633_thumb.jpg

  • Like 1
  • 1 month later...

No date booked yet but all goes well it should be within the next couple of weeks. The engine has pretty much just been bolted in so there's still the wiring, oil lines and a bit of stuffing around to do but hopefully there's no big delays. The guys at the exhaust shop were laughing when I said I wanted a 4" exhaust with a 60mm wastegate fitted all underneath and behind the turbo, there's not much room but I think they will fit it in there.

No date booked yet but all goes well it should be within the next couple of weeks. The engine has pretty much just been bolted in so there's still the wiring, oil lines and a bit of stuffing around to do but hopefully there's no big delays. The guys at the exhaust shop were laughing when I said I wanted a 4" exhaust with a 60mm wastegate fitted all underneath and behind the turbo, there's not much room but I think they will fit it in there.

Wow awesome, good progress! Looking good, it's still no wee baby by the looks. Good luck with the rest of the fabrication, hope they can sort something out :)

Exciting times!

Gavin Wood will be tuning it, im getting rid of the L Jetro and going D Jetro, I know its old school but it will still do what I want, also I just got called back to work so I wont be staying home for the next few weeks i'll be away so she will have to wait for a bit longer

  • 3 weeks later...

Gavin Wood will be tuning it, im getting rid of the L Jetro and going D Jetro, I know its old school but it will still do what I want, also I just got called back to work so I wont be staying home for the next few weeks i'll be away so she will have to wait for a bit longer

Still, getting pretty close! Possibility it may be nearly running around the new year, you reckon? It's going to be a hell of a grumpy road car combo :D

Its at all performance garage getting fab work done, heres some pics off his fb page. Change of plan on the tune as well going to be tuned at efi and going all out with a vipec or haltech not sure which yet but will speak to the tuner and pick one.

post-7636-0-71739200-1417591375_thumb.png

post-7636-0-48192200-1417591560_thumb.png

post-7636-0-80490700-1417591636_thumb.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...