Jump to content
SAU Community

Recommended Posts

So I have just booked a holiday to the US (California) for early next year and thought I should do a little part shopping for my 2012 V37 SP sedan, but would like opinions on what everybody thinks would be the best purchases my criteria is combined weight not to exceed 30kg (baggage allowance) and max budget USD$1700 thoughts of potential purchases so far (not all but a combination).....

- Stillen or Takeda CAI

- Fast Intentions Resonated HFC

- Motordyne M370 manifold

- Alkebono BBK

- AutoKitsX diffuser

And the Car is dropped on Swifts already...

All opinions welcome!

Link to comment
https://www.sau.com.au/forums/topic/447391-us-shopping-list/
Share on other sites

An Akebono kit will be well over 30kg - I shipped one a few months ago and it was 69kg including packaging. Most of this is the rotors, so you could consider buying them here & getting the calipers & pads in the US. It would also chew up pretty much all of your budget on its own.

Remember that you have to declare things you buy overseas when you come back - brand new car parts will trigger alarm bells at customs. The same $1,000 tax free rule applies (if you spend over A$1,000 you pay duties, tax and GST on the WHOLE amount), and if you buy things new over there and bring them back, customs WILL ask you for a copy of the purchase receipts to verify value. Just a thing lots of people don't consider then get caught out $$$-wise BIG time.

Gee dog:

Have you installed the BBK yet, if so how do you like it aesthetically and performance wise?

Nightcrawler:

Thanks for the heads up, is it a $1000 max per item or combined value?

Colin:

Will have to go for a spin in yours and see/hear the Stillen unit in action!

Thanks for the comments guys!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...