Jump to content
SAU Community

Recommended Posts

If you're like me and race on sticky radial tyres instead of slicks and you wish there was a class you could race in that catered to your daily driver rather than a weekend trailer toy, then help me out with some input on what YOU think would make a great "Street Car/Street Tyre Class".

I am looking for suggestions, ideas, input, criticisms and discussions so as to best formulate a new class that lends itself to your street car.

===================

Ideas and points that are open for serious discussion include:

What constitutes a "Street Car"?

What constitutes a "Street Tyre"?

What types of vehicles should be welcomed to compete?

What weight breaks, (if any) should be imposed to keep the racing level?

===================

At the moment I am leaning towards a RWD Street Car/Street Tyre class with breaks for 4cyl/2rotar and 6cyl/3rotar. This is just my personal opinion though and it is open to suggestion and ideas.

This excercise is born from discussions at street meets, drag events, cruises, forums etc and wherever phrases like, "On street rubber" and "In street trim" are mentioned. I really think that there is no opportunity for the guys and girls that race their cars at street meets to compete in a class geared especially for them.

What do you think?

Adrian

[email protected]

Link to comment
https://www.sau.com.au/forums/topic/44759-proposed-street-carstreet-tyre-class/
Share on other sites

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

If you want street tyre records go to http://www.hpi.com.au/drag_records.php and whats wrong with SPORT RWD as the tyre used in that class has to be DOT rated which at the end of the day opens the door to non radial tyres but as shown in other threads no matter what we say they are legal, you must have both front seats in the car, use OEM fuel tank, maybe at best they could seperate the RWD and AWD in having SPORT RWD and SPORT AWD

Full rules for sports mod racing are here http://www.andra.com.au/technical/d...actRulebook.pdf have a look at section 3.3 SPORTS RWD and I think its pretty well what your asking for other then the fact of AWD and RWD are together

Brett

Excellent stuff Adrian! I for one would love to see a class like this evolve :)

"Street car" - hmmm... there are so many ways to go here. Must have full interior. Can use non original seats but must have both front seats and ALL interior trim fitted. Must be driven, under its own power, to the track.

"Street tyres" - Must be a DOT approved radial.

"Weight" - Minimal weight reduction allowed.

Don't shoot me on these suggestions, as I'm just thinking out aloud at the moment.

hahaha don't worry I'll probably cop the same sh*t

The way I look at it is, slicks and nitrous are both tools used to get quicker times, they are both illegal on the street and if this is a true street class neither have a place in it, also with the Sports RWD class being so similar if there aren't a lot of changes made like this I can't really see Andra starting another class

Entry restircted to car made after 1980, and must be fuel injected

Must be 'able' to be driven to and from track

No NOS

DOT approved tyres

use original of variant of original drivetrain (ie original suspension/diff mounting points etc)

have two front seats of any type, mounted in origianl position

open to weight reduction

original fuel tank location to be retained, but use of secondary tank ok, as long as the fuel is drawn from the original tank

original glass to be retained - no plastic replacements

all I can think of ATM, will update if I think of anything else

Chris

I asked about a radial tyres class back in March when I noticed BF Goodrich are one of the major sponsors at such events as Drag Combat and Jamboree but there wasn't really a class aimed at there product here's what Jason repled

Sent: Monday, March 01, 2004 4:29 PM

Subject: Hello from ANDRA Sport Compact

Dear Brett,

Ray Box from Jamboree Promotions has forwarded your enquiry on to me, and

I'm more than happy to fill you in on the future developments within the

current ANDRA Sport Compact class structure. Currently we are running with

a set of classes and rules very similar to the NHRA system in the States,

but being good old fashioned Aussies, we will have to eventually change them

to suit our local racing community.

I'm a firm believer in developing a 'street tyre-untubbed' class to cater

for the rise in popularity of that type of vehicle in the Sport Compact

industry here in Australia. Yes BFGoodrich is sponsoring quite a few

events, and YES we are working with them and other tyre manufacturers in

developing a specific 'no slicks allowed' street tyre racing class.

Currently we have Sport FWD and Sport RWD (which includes 4WD vehicles), and

I will personally be submitting class/rule changes to introduce a separate

Sport 4WD class, and a blanket ban on non DOT tyres and slicks for those

classes.

I think this will keep the racing affordable, interesting and very street

orientated. Not everyone wants to tub their car, and not everyone wants to

run slicks. It's my duty as ANDRA Sport Compact Director to look after what

the racers want, so hence the future development of these ideas.

Just quickly, re-check the rules regarding Sport RWD/AWD as my current copy

states... 'All tyres must be DOT approved. Retreads, Space saver spares,

or any other non-DOT approved tyres prohibited' - ANDRA Sport Compact rules

01/03/2004

The rules you should always go by are on the ANDRA website at

www.andra.com.au I always recommend that if you have a query, contact us

so you get the right information first time.

Ok well that's it for now, if your at the Jamboree in March at WSID, come up

and say G'Day. Oh and if your racing.......good luck!

Regards

Jason O'Halloran

ANDRA Sport Compact Director

[email protected]

i think the sport rwd class should go on a slightly different path such as

1) unleaded race or pump gas only

2)oem style transmission( no seqential or non downshifting boxes)

3)no automatic trans brakes

4)no cutting or modifying wheel tubs,floor,arches ect

5) approved street tires only( can be dot or radials)

6) full interior and operational dash

7)no perspex ar lexan windows(glass only)

8)current rego(not necesarily engineered but it will have to have all street equipt...wipers lights ect)

9)seats can be replaced but must have at least 2 seats in factory possition

10)possible to have restricted size tyres according to the weight(eg min weight 2100lb .. 2100 to 2500 lb max tire 8 inch wide....2500lbto 2900 lb max tire 9 inch...2900lb plus can use10 inch tire) 4wd cars will need special rules...

11)minumum weight breaks to apply to engine type 4cyl / 13brotary to be minumum 2500lb....6 cyl and20b rotary to be2800lb

12)i realy love nos but it gets a 200lb penalty for all cars under 3000lb

these are just a few rules off the top of my head atm

i have done a bit of work with the oz mod class and it is more a full on race class aimed at race modified street cars(most beyond rego) that use race fuels as well....re tweaked rules to suit "street " type cars would work well as a typical mazda rx2 with a 13bt would be way under 2700lb so its a bit harsh for guys to put weight in so limit them with tires then adjust weight, he wont make as much power as the other class cause he is on pump gas... it would possibly bring some cars back to earth and KEEP IT REAL :jk:

over all the sport rwd rules are not sobad the just need a little adjustments to suit people s needs

CHEERS

rob

oz mod racer

Entry restircted to car made after 1980, and must be fuel injected

Must be 'able' to be driven to and from track

No NOS

DOT approved tyres

use original of variant of original drivetrain (ie original suspension/diff mounting points etc)

have two front seats of any type, mounted in origianl position

open to weight reduction

original fuel tank location to be retained, but use of secondary tank ok, as long as the fuel is drawn from the original tank

original glass to be retained - no plastic replacements

all I can think of ATM, will update if I think of anything else

Chris

that pre 1980 rule realy caused drag combat to suffer in the early years..

a complete new class is a very tall ask and they wouldnt approve it if they already have one similar

tweaking sport rwd rules is the answer and work out why you dont fit the rules

my 2 c

why does the car need rear seats? my cars being built for drag/circit/drift/steet and will run radial tyres and all std body/sus but the rear seats have been relaced with a half cage, leave the interier alone open as it has no affect on performance.

making people drive to and from the strip also not nesesary, i will probably never drive to the drag stip my car will be regod but i also have a truck so its very easy for me but the thought of being defected on the way home is enough for me to truck it.

but some good ideas, just need to get the big meets ie nationals, drag combat, jamboree to run something similar

Yeah I agree on no rear seat Clint, they don't weigh thaaat much anyway. But it should have the both the fronts and all the trim (doors & dash).

Hmmm... if the car is a true street car then it "must" see use on the street - hence my call of driving it to the track. But yeah, trucking it in is understandable. I still can't help thinking that rego'd cars that 'arrive' on a truck are just "token" street cars.

I'd like to see a class that is as representative of true daily driven style cars as possible. Ok, so it's not a huge crowd pleaser, but it could be once up and running. Just think how competative it would be! You only have to look at David Lee's (Leewah) 33 GT-R as to how quick a true street car can go - a best ET of 10.4 and a best mph of over 140! Even without the nitrous that is a car I'd pay money to watch.

I subscribe to the theory of Run What Ya Brung.

No Nitto style tyres, only everyday street tyres.

Standard engine model for car.

Standard Transmission.

No NOS

How about, Must run same wheels on the front as on the back.......

BASS OUT

No Nitto style tyres, only everyday street tyres.

Nitto's are stickier than normal Radial street tyres. Pointless to exclude them.

I think some tweaking of the existing class would suit us better and make it more affordable which Jason said, is the goal.

Adrian

I subscribe to the theory of Run What Ya Brung.

No Nitto style tyres, only everyday street tyres.

Standard engine model for car.

Standard Transmission.

No NOS

How about, Must run same wheels on the front as on the back.......

BASS OUT

sounds like a recipe for a field of boring cars, even though my own vehicle would have subscrided to such a formula.

scrutineers would also have to be tyre experts to recognise sticky tyres. eg, Federal is talking about bringing out a sticky drag tyre that looks exactly like their 17 inch street tyre.

I don't think it would be boring at all.

I think 90% of the people on this forum would be able to run in this field.

Ths only people who wouldn't would be those with an engine/transmission swap.

Maybe the tyres would be hard to police, but if you require same wheels on front as the back, it would certainly be a bit harder....

You could also have a "Blacklist" of tyres which are like the Federal tyres. that would be that hard.

BASS OUT

Why exclude Nittos and the like? It doesn't make any sense to do that. Any of the semi-comps are fine for use on the street, and many people use them on the street at one time or another. As Chris said, I use Nittos as my everyday rubber on the rear and RE540S on the front.

If it is to be a "street" class, and semi-comps are legal for street use (NT555Rs "may" not be legal in OZ), then why exclude them?

You only have to look at your best 60ft vs mine Bass Junky. Nittos only help if you can drive, which clearly I can't - well not very well with my current power level :D

I think we should look at the question as this.

What constitues a Street Tyre.

I reckon a street tyre is your normal everyday road tyre, not a semi-comp tyre.

I understand that some people drive around with semi-comps on all the time, but I think that's the exception to the rule.

But at the end of the day, its a traction thing, and you can go and buy pineapples and special dampers to set you up for launch, so why are tyres any different.

Also, if you want to be competitive, you will just have to go buy a set if you want to win.

Two schools of thought I guess.

BASS OUT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...