Jump to content
SAU Community

Recommended Posts

Hi,

I have a set of Quantum coilovers in my car, and the left rear shock is leaking oil and in need of a rebuild.

So far I have spoken to two people, one said he knows a place in melbourne who can rebuild them, the other said that for the cost involved in rebuilding them, he can do me a rear set of Bilstiens and have them vavled correctly

Whats the go with rebuilding coilovers? Has anyone had it done succesfully?

Chris

Link to comment
https://www.sau.com.au/forums/topic/44847-rebuilding-coilovers-help/
Share on other sites

http://www.shockreco.com.au/

These guys rebuilt my APEXi T-max coilovers successfully. Might not be of much help in Brissie though. Cost me $550 to get all four coilovers rebuilt. If you want them revalved also there is no extra cost during the rebuild.

I picked them up 2nd hand and got them checked out before launching in and fitting them. The gas had leaked out of 3 of them which generally means the oil isn't too far behind, so I got them rebuilt. I told them I was in no hurry when I dropped them in as the car was still in compliance at that stage and it still only took 4 days to get the coilovers back. The service was very good. If I want them re valved now he said to let him know when and drop them in in the morning and he would have them ready by the arfternoon. Really good to deal with. Always has plenty of race prepared vehicles there which always gives me confidence.

I am going to a place today here in Adelaide, apparently they have rebuilt Tien's etc, so I will let everyone know how I go, if they are any good, i will post up contact details

Chris

  • 4 weeks later...

Well, after much stuffing about locally, I am sending mine up to the guys in QLD.

The workshop, which will remain un-named (PM me if you want to know SA guys) had them for 5 weeks, and I rang them today, and they said it would be another 7 weeks. Totally un-acceptable

Rang the guys in QLD www.shockreco.com and they reckon they could turn in around in under a week - needless to say, once I have picked them up they are heading up to them

Will keep everyone informed,

Chris

  • 2 weeks later...

Shocks are ready, and on there way back. A week turnaround time all up once they had recieved them, pretty good I reckon!

Cost me the standard rebuild price of $147.50ea plus freight, so works out to be a excellent price all up.

Going to get my fronts done once I have the rears back, will let everyone know how they go once they are installed

They also do Teins, HKS, Nismo etc, pretty much anything

Chris

Put my rebuilt rear shocks in last night, everything went well.

I went for a quick drive last night and they feel great, the past two months I have been running around on stock tyres and a set of half decent rear shocks, so it was great the get some decent sus and tyres back on the car.

I also noticed that my front left was starting to get a bit noisy too, so looks like I will need to get them done soon as well ;)

Overall I reckon they have done a top job, I guess only time will tell if thats the case, but so far I cannot speak highly enough of their service - reccomend them to anyone.

After being given the run around locally, it was good to finally get some decent service from someone. It ended up costing me $147.50 to get each shock rebuilt, and the postage cost me around $80 there and back, so it works out to be reasonably cheap, cheapre thnbuying new shocks anyhow!

Will let everyone know how they go over the next few months :(

Chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...